17 Nov
2015
17 Nov
'15
7:15 p.m.
Dear msnoise community,
I have installed MSNoise and are really looking forward to use it. I
followed the documentation which is very helpful :). Unfortunately I
have a problem with scanning the archive. When I use
$ msnoise populate
I get:
> Populating the Station table
Adding: ES BUENA
Adding: ES NATPA
That is correct. But the next step is then:
$ msnoise scan_archive
2015-11-17 18:09:51 [INFO] *** Starting: Scan Archive ***
2015-11-17 18:09:51 [INFO] Will work on 1 threads
2015-11-17 18:09:51 [INFO] Started:
/data/meivol/14-TEIDE/MINISEED/2014/ES/BUENA/HHZ.D
[INFO/Process-1] child process calling self.run()
[INFO/Process-1] process shutting down
[DEBUG/Process-1] running all "atexit" finalizers with priority >= 0
[DEBUG/Process-1] running the remaining "atexit" finalizers
[INFO/Process-1] process exiting with exitcode 0
2015-11-17 18:09:52 [INFO] Started:
/data/meivol/14-TEIDE/MINISEED/2014/ES/NATPA/HHZ.D
[INFO/Process-2] child process calling self.run()
[INFO/Process-2] process shutting down
[DEBUG/Process-2] running all "atexit" finalizers with priority >= 0
[DEBUG/Process-2] running the remaining "atexit" finalizers
[INFO/Process-2] process exiting with exitcode 0
2015-11-17 18:09:52 [INFO] *** Finished: Scan Archive ***
2015-11-17 18:09:52 [INFO] It took 1.00 seconds
[INFO/MainProcess] process shutting down
[DEBUG/MainProcess] running all "atexit" finalizers with priority >= 0
[DEBUG/MainProcess] running the remaining "atexit" finalizers
I attached the data_availability plot which shows that the data is
there... Is it maybe that I use the wrong data structure? I choose SDS
because my data looks like that:
/data/meivol/14-TEIDE/MINISEED/2014/ES/NATPA/HHZ.D/ES.NATPA..HHZ.D.2014.096
Thanks in advance,
Meike
--
Meike Volk
PhD student
School of Earth Sciences
University College Dublin
17 Nov
17 Nov
7:34 p.m.
msnoise scan_archive --init?
----- Mensaje original -----
De: "Meike Volk" <meike.volk(a)ucdconnect.ie>
Para: "Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic
Noise" <msnoise(a)mailman-as.oma.be>
Enviados: Martes, 17 de Noviembre 2015 18:15:57
Asunto: [MSNoise] msnoise scan_archive
Dear msnoise community,
I have installed MSNoise and are really looking forward to use it. I
followed the documentation which is very helpful :). Unfortunately I
have a problem with scanning the archive. When I use
$ msnoise populate
I get:
> Populating the Station table
Adding: ES BUENA
Adding: ES NATPA
That is correct. But the next step is then:
$ msnoise scan_archive
2015-11-17 18:09:51 [INFO] *** Starting: Scan Archive ***
2015-11-17 18:09:51 [INFO] Will work on 1 threads
2015-11-17 18:09:51 [INFO] Started:
/data/meivol/14-TEIDE/MINISEED/2014/ES/BUENA/HHZ.D
[INFO/Process-1] child process calling self.run()
[INFO/Process-1] process shutting down
[DEBUG/Process-1] running all "atexit" finalizers with priority >= 0
[DEBUG/Process-1] running the remaining "atexit" finalizers
[INFO/Process-1] process exiting with exitcode 0
2015-11-17 18:09:52 [INFO] Started:
/data/meivol/14-TEIDE/MINISEED/2014/ES/NATPA/HHZ.D
[INFO/Process-2] child process calling self.run()
[INFO/Process-2] process shutting down
[DEBUG/Process-2] running all "atexit" finalizers with priority >= 0
[DEBUG/Process-2] running the remaining "atexit" finalizers
[INFO/Process-2] process exiting with exitcode 0
2015-11-17 18:09:52 [INFO] *** Finished: Scan Archive ***
2015-11-17 18:09:52 [INFO] It took 1.00 seconds
[INFO/MainProcess] process shutting down
[DEBUG/MainProcess] running all "atexit" finalizers with priority >= 0
[DEBUG/MainProcess] running the remaining "atexit" finalizers
I attached the data_availability plot which shows that the data is
there... Is it maybe that I use the wrong data structure? I choose SDS
because my data looks like that:
/data/meivol/14-TEIDE/MINISEED/2014/ES/NATPA/HHZ.D/ES.NATPA..HHZ.D.2014.096
Thanks in advance,
Meike
--
Meike Volk
PhD student
School of Earth Sciences
University College Dublin
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
--
Sergio Morales Méndez
Profesor de Estado en Ciencias m/Física
sergio.morales(a)sernageomin.cl
@ProfeSergioM
------------------------------------------------
Grupo Sismología
Observatorio Volcanológico de los Andes del Sur OVDAS
RNVV - SERNAGEOMIN
Rudecindo Ortega 03850
045-2270700
Temuco
7:41 p.m.
Hi,
I tried it with this the first time and it gives me exactly the same error.
Thanks,
Meike
On 17/11/15 18:34, Sergio Morales Méndez wrote:
msnoise scan_archive --init?
----- Mensaje original -----
De: "Meike Volk" <meike.volk(a)ucdconnect.ie>
Para: "Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic
Noise" <msnoise(a)mailman-as.oma.be>
Enviados: Martes, 17 de Noviembre 2015 18:15:57
Asunto: [MSNoise] msnoise scan_archive
Dear msnoise community,
I have installed MSNoise and are really looking forward to use it. I
followed the documentation which is very helpful :). Unfortunately I
have a problem with scanning the archive. When I use
$ msnoise populate
I get:
--
Meike Volk
PhD student
School of Earth Sciences
University College Dublin
> Populating the Station table
Adding:
ES BUENA
Adding: ES NATPA
That is correct. But the next step is then:
$ msnoise scan_archive
2015-11-17 18:09:51 [INFO] *** Starting: Scan Archive ***
2015-11-17 18:09:51 [INFO] Will work on 1 threads
2015-11-17 18:09:51 [INFO] Started:
/data/meivol/14-TEIDE/MINISEED/2014/ES/BUENA/HHZ.D
[INFO/Process-1] child process calling self.run()
[INFO/Process-1] process shutting down
[DEBUG/Process-1] running all "atexit" finalizers with priority >= 0
[DEBUG/Process-1] running the remaining "atexit" finalizers
[INFO/Process-1] process exiting with exitcode 0
2015-11-17 18:09:52 [INFO] Started:
/data/meivol/14-TEIDE/MINISEED/2014/ES/NATPA/HHZ.D
[INFO/Process-2] child process calling self.run()
[INFO/Process-2] process shutting down
[DEBUG/Process-2] running all "atexit" finalizers with priority >= 0
[DEBUG/Process-2] running the remaining "atexit" finalizers
[INFO/Process-2] process exiting with exitcode 0
2015-11-17 18:09:52 [INFO] *** Finished: Scan Archive ***
2015-11-17 18:09:52 [INFO] It took 1.00 seconds
[INFO/MainProcess] process shutting down
[DEBUG/MainProcess] running all "atexit" finalizers with priority >= 0
[DEBUG/MainProcess] running the remaining "atexit" finalizers
I attached the data_availability plot which shows that the data is
there... Is it maybe that I use the wrong data structure? I choose SDS
because my data looks like that:
/data/meivol/14-TEIDE/MINISEED/2014/ES/NATPA/HHZ.D/ES.NATPA..HHZ.D.2014.096
Thanks in advance,
Meike
18 Nov
18 Nov
9:39 a.m.
Hi Meike,
What are the values of startdate and enddate in the configuration ?
Could you attach the output of "msnoise bugreport -m" ?
Thanks
Thomas
Le 17/11/2015 19:15, Meike Volk a écrit :
Dear msnoise community,
I have installed MSNoise and are really looking forward to use it. I
followed the documentation which is very helpful :). Unfortunately I
have a problem with scanning the archive. When I use
$ msnoise populate
I get:
> Populating the Station table
Adding: ES BUENA
Adding: ES NATPA
That is correct. But the next step is then:
$ msnoise scan_archive
2015-11-17 18:09:51 [INFO] *** Starting: Scan Archive ***
2015-11-17 18:09:51 [INFO] Will work on 1 threads
2015-11-17 18:09:51 [INFO] Started:
/data/meivol/14-TEIDE/MINISEED/2014/ES/BUENA/HHZ.D
[INFO/Process-1] child process calling self.run()
[INFO/Process-1] process shutting down
[DEBUG/Process-1] running all "atexit" finalizers with priority >= 0
[DEBUG/Process-1] running the remaining "atexit" finalizers
[INFO/Process-1] process exiting with exitcode 0
2015-11-17 18:09:52 [INFO] Started:
/data/meivol/14-TEIDE/MINISEED/2014/ES/NATPA/HHZ.D
[INFO/Process-2] child process calling self.run()
[INFO/Process-2] process shutting down
[DEBUG/Process-2] running all "atexit" finalizers with priority >= 0
[DEBUG/Process-2] running the remaining "atexit" finalizers
[INFO/Process-2] process exiting with exitcode 0
2015-11-17 18:09:52 [INFO] *** Finished: Scan Archive ***
2015-11-17 18:09:52 [INFO] It took 1.00 seconds
[INFO/MainProcess] process shutting down
[DEBUG/MainProcess] running all "atexit" finalizers with priority >= 0
[DEBUG/MainProcess] running the remaining "atexit" finalizers
I attached the data_availability plot which shows that the data is
there... Is it maybe that I use the wrong data structure? I choose SDS
because my data looks like that:
/data/meivol/14-TEIDE/MINISEED/2014/ES/NATPA/HHZ.D/ES.NATPA..HHZ.D.2014.096
Thanks in advance,
Meike
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
11:31 a.m.
Hi Thomas,
I set startdate and enddate to 2014-01-01 and 2014-12-01. This is the
output of the "msnoise bugreport -m":
Let's Bug Report MSNoise !
************* Computer Report *************
----------------+PYTHON+-------------------
Python: 2.7.10 |Anaconda 2.3.0 (64-bit)| (default, Oct 19 2015, 18:04:42)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-1)]
I also attached the output of msnoise info.
Thanks,
Meike
11:35 a.m.
Hi,
to be sure, set ref_begin and ref_end to the same values.
Then, nothing to do with this step, but be careful of your
"cc_sampling_rate" at 100 Hz, it's quite high. Then the lowpass at 1Hz
could be an issue when filtering (see the Filters config), if you plan
to use 0.1-1.0 Hz band, set the lowpass to 2.0 at least.
Thomas
Le 18/11/2015 11:31, Meike Volk a écrit :
Hi Thomas,
I set startdate and enddate to 2014-01-01 and 2014-12-01. This is the
output of the "msnoise bugreport -m":
Let's Bug Report MSNoise !
************* Computer Report *************
----------------+PYTHON+-------------------
Python: 2.7.10 |Anaconda 2.3.0 (64-bit)| (default, Oct 19 2015, 18:04:42)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-1)]
I also attached the output of msnoise info.
Thanks,
Meike
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
11:43 a.m.
Hi,
I changed the values as you suggested. I still can't scan the archive.
Thanks,
Meike
On 18/11/15 10:35, Thomas Lecocq wrote:
Hi,
to be sure, set ref_begin and ref_end to the same values.
Then, nothing to do with this step, but be careful of your
"cc_sampling_rate" at 100 Hz, it's quite high. Then the lowpass at 1Hz
could be an issue when filtering (see the Filters config), if you plan
to use 0.1-1.0 Hz band, set the lowpass to 2.0 at least.
Thomas
Le 18/11/2015 11:31, Meike Volk a écrit :
msnoise
--
Meike Volk
PhD student
School of Earth Sciences
University College Dublin
Hi Thomas,
I set startdate and enddate to 2014-01-01 and 2014-12-01. This is the
output of the "msnoise bugreport -m":
Let's Bug Report MSNoise !
************* Computer Report *************
----------------+PYTHON+-------------------
Python: 2.7.10 |Anaconda 2.3.0 (64-bit)| (default, Oct 19 2015,
18:04:42)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-1)]
I also attached the output of msnoise info.
Thanks,
Meike
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
11:47 a.m.
can you output again the result of
msnoise scan_archive --init
?
Thomas
Le 18/11/2015 11:43, Meike Volk a écrit :
Hi,
I changed the values as you suggested. I still can't scan the archive.
Thanks,
Meike
On 18/11/15 10:35, Thomas Lecocq wrote:
Hi,
to be sure, set ref_begin and ref_end to the same values.
Then, nothing to do with this step, but be careful of your
"cc_sampling_rate" at 100 Hz, it's quite high. Then the lowpass at
1Hz could be an issue when filtering (see the Filters config), if you
plan to use 0.1-1.0 Hz band, set the lowpass to 2.0 at least.
Thomas
Le 18/11/2015 11:31, Meike Volk a écrit :
msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise Hi Thomas,
I set startdate and enddate to 2014-01-01 and 2014-12-01. This is
the output of the "msnoise bugreport -m":
Let's Bug Report MSNoise !
************* Computer Report *************
----------------+PYTHON+-------------------
Python: 2.7.10 |Anaconda 2.3.0 (64-bit)| (default, Oct 19 2015,
18:04:42)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-1)]
I also attached the output of msnoise info.
Thanks,
Meike
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
11:49 a.m.
Meike,
Actually, reading your email again, it seems all is OK, as the
data_availability shows the data is correctly read and stored in the
database, isn't it ?
Thomas
Le 18/11/2015 11:47, Thomas Lecocq a écrit :
can you output again the result of
msnoise scan_archive --init
?
Thomas
Le 18/11/2015 11:43, Meike Volk a écrit :
Hi,
I changed the values as you suggested. I still can't scan the archive.
Thanks,
Meike
On 18/11/15 10:35, Thomas Lecocq wrote:
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise Hi,
to be sure, set ref_begin and ref_end to the same values.
Then, nothing to do with this step, but be careful of your
"cc_sampling_rate" at 100 Hz, it's quite high. Then the lowpass at
1Hz could be an issue when filtering (see the Filters config), if
you plan to use 0.1-1.0 Hz band, set the lowpass to 2.0 at least.
Thomas
Le 18/11/2015 11:31, Meike Volk a écrit :
msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise Hi Thomas,
I set startdate and enddate to 2014-01-01 and 2014-12-01. This is
the output of the "msnoise bugreport -m":
Let's Bug Report MSNoise !
************* Computer Report *************
----------------+PYTHON+-------------------
Python: 2.7.10 |Anaconda 2.3.0 (64-bit)| (default, Oct 19 2015,
18:04:42)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-1)]
I also attached the output of msnoise info.
Thanks,
Meike
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
12:02 p.m.
To all,
for reference, there was no issue here, just crappy verbosity of the
scan_archive procedure. this will be removed from the next release.
in addition: the plot data_availability command actually reads from the
database, not from the files, so if the plot shows data, it means the
scan_archive step was OK.
Solved!
Thomas
Le 18/11/2015 11:49, Thomas Lecocq a écrit :
Meike,
Actually, reading your email again, it seems all is OK, as the
data_availability shows the data is correctly read and stored in the
database, isn't it ?
Thomas
Le 18/11/2015 11:47, Thomas Lecocq a écrit :
can you output again the result of
msnoise scan_archive --init
?
Thomas
Le 18/11/2015 11:43, Meike Volk a écrit :
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise Hi,
I changed the values as you suggested. I still can't scan the archive.
Thanks,
Meike
On 18/11/15 10:35, Thomas Lecocq wrote:
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise Hi,
to be sure, set ref_begin and ref_end to the same values.
Then, nothing to do with this step, but be careful of your
"cc_sampling_rate" at 100 Hz, it's quite high. Then the lowpass at
1Hz could be an issue when filtering (see the Filters config), if
you plan to use 0.1-1.0 Hz band, set the lowpass to 2.0 at least.
Thomas
Le 18/11/2015 11:31, Meike Volk a écrit :
> Hi Thomas,
>
> I set startdate and enddate to 2014-01-01 and 2014-12-01. This is
> the output of the "msnoise bugreport -m":
>
> Let's Bug Report MSNoise !
> ************* Computer Report *************
> ----------------+PYTHON+-------------------
> Python: 2.7.10 |Anaconda 2.3.0 (64-bit)| (default, Oct 19 2015,
> 18:04:42)
> [GCC 4.4.7 20120313 (Red Hat 4.4.7-1)]
>
>
> I also attached the output of msnoise info.
>
> Thanks,
> Meike
>
>
> _______________________________________________
> MSNoise mailing list
> MSNoise(a)mailman-as.oma.be
> http://mailman-as.oma.be/mailman/listinfo/msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
3509
days inactive
3510
days old
9 comments
3 participants
participants (3)
-
Meike Volk -
Sergio Morales Méndez -
Thomas Lecocq