1 Oct
2019
1 Oct
'19
2:30 p.m.
Hello,
I was wondering if it's possible to use msnoise plot functions for data
from different analyzes? To be more precise, I would like to plot
interferograms for stacks I have saved from previous study without me going
through processes of scanning archive, computing-cc and stacking. I assume
I would have to populate station table with station names I used and create
filter with the appropriate name.
Thank you in advance!
1 Oct
1 Oct
2:32 p.m.
Hi,
Actually, all you have to do it is to have the right data structure
(STACKS/filterid/...)
and pass the "-f" parameter to the plots, e.g. msnoise plot ccftime -f 99
and even if the filter doens't exist, you'll still be able to plot the
results (the title of the plot will be replaced by Zeros).
Thomas
On 01/10/2019 14:30, Helena Latecki wrote:
Hello,
I was wondering if it's possible to use msnoise plot functions for data
from different analyzes? To be more precise, I would like to plot
interferograms for stacks I have saved from previous study without me going
through processes of scanning archive, computing-cc and stacking. I assume
I would have to populate station table with station names I used and create
filter with the appropriate name.
Thank you in advance!
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
--
Dr. Thomas Lecocq
Geologist - Seismologist
Seismology - Gravimetry
Royal Observatory of Belgium
*
* * * * *
* * * *
---------
http://www.seismology.be
http://msnoise.org
http://twitter.com/#!/Seismologie_be
https://www.facebook.com/seismologie.be
2:53 p.m.
Thank you for the fast reply, but the solution you proposed unfortunately
doesn't work for me.
Function for plotting works fine, but I get an empty graph.
This is what I get in command window:
RuntimeWarning: All-NaN slice encountered
vmax = np.nanmax(data) * 0.9
I checked the parameters in configuration and the path of the folder where
the stack files are and everything seems to be in order.
Helena
On Tue, Oct 1, 2019 at 2:32 PM Thomas Lecocq <Thomas.Lecocq(a)seismology.be>
wrote:
Hi,
Actually, all you have to do it is to have the right data structure
(STACKS/filterid/...)
and pass the "-f" parameter to the plots, e.g. msnoise plot ccftime -f 99
and even if the filter doens't exist, you'll still be able to plot the
results (the title of the plot will be replaced by Zeros).
Thomas
On 01/10/2019 14:30, Helena Latecki wrote:
Hello,
I was wondering if it's possible to use msnoise plot functions for data
from different analyzes? To be more precise, I would like to plot
interferograms for stacks I have saved from previous study without me
going
through processes of scanning archive,
computing-cc and stacking. I
assume
I would have to populate station table with
station names I used and
create
filter with the appropriate name.
Thank you in advance!
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
--
Dr. Thomas Lecocq
Geologist - Seismologist
Seismology - Gravimetry
Royal Observatory of Belgium
*
* * * * *
* * * *
---------
http://www.seismology.be
http://msnoise.org
http://twitter.com/#!/Seismologie_be
https://www.facebook.com/seismologie.be
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
5:16 p.m.
Hi,
Well, there are zero reason it should fail.
Please confirm:
1. you have run msnoise with different settings
2. you have exported the STACKS folder on another name each time
3. You have tried moving each of them to a new filter id in the new
STACKS folder: for example: "myfirsttest" -> STACKS/01 ;
"mysecondtest"
-> STACKS/02 etc ? so all folders/subfolders exist
(STACKS/01/001_DAYS/ZZ/NE_STA1_NE_STA2/ and files there.
4. You have ran "msnoise plot ccftime -f 3 NE.STA1 NE.STA2"
Thomas
On 01/10/2019 14:53, Helena Latecki wrote:
Thank you for the fast reply, but the solution you
proposed unfortunately
doesn't work for me.
Function for plotting works fine, but I get an empty graph.
This is what I get in command window:
RuntimeWarning: All-NaN slice encountered
vmax = np.nanmax(data) * 0.9
I checked the parameters in configuration and the path of the folder where
the stack files are and everything seems to be in order.
Helena
On Tue, Oct 1, 2019 at 2:32 PM Thomas Lecocq <Thomas.Lecocq(a)seismology.be>
wrote:
--
Dr. Thomas Lecocq
Geologist - Seismologist
Seismology - Gravimetry
Royal Observatory of Belgium
*
* * * * *
* * * *
---------
http://www.seismology.be
http://msnoise.org
http://twitter.com/#!/Seismologie_be
https://www.facebook.com/seismologie.be
Hi,
Actually, all you have to do it is to have the right data structure
(STACKS/filterid/...)
and pass the "-f" parameter to the plots, e.g. msnoise plot ccftime -f 99
and even if the filter doens't exist, you'll still be able to plot the
results (the title of the plot will be replaced by Zeros).
Thomas
On 01/10/2019 14:30, Helena Latecki wrote:
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise Hello,
I was wondering if it's possible to use msnoise plot functions for data
from different analyzes? To be more precise, I would like to plot
interferograms for stacks I have saved from previous study without me
going
through processes of scanning archive,
computing-cc and stacking. I
assume
I would have to populate station table with
station names I used and
create
filter with the appropriate name.
Thank you in advance!
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
--
Dr. Thomas Lecocq
Geologist - Seismologist
Seismology - Gravimetry
Royal Observatory of Belgium
*
* * * * *
* * * *
---------
http://www.seismology.be
http://msnoise.org
http://twitter.com/#!/Seismologie_be
https://www.facebook.com/seismologie.be
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
2 Oct
2 Oct
10:06 a.m.
Hi,
So I tried everything you suggested but it still doesn't work. I know it
shouldn't fail because I tried plotting the data on my own to see if
files are corrupted but that's not the case.
Also, I managed to successfully use MSNoise plot interferogram function for
the files I stacked less than a day ago, so I'm wondering if the problem
could be the fact that the files I'm trying to plot are older than 5 months
(similarly how the stack function in MSNoise version 1.5 required -i option
to stack all cc files).
Helena
On Tue, Oct 1, 2019 at 5:16 PM Thomas Lecocq <Thomas.Lecocq(a)seismology.be>
wrote:
Hi,
Well, there are zero reason it should fail.
Please confirm:
1. you have run msnoise with different settings
2. you have exported the STACKS folder on another name each time
3. You have tried moving each of them to a new filter id in the new
STACKS folder: for example: "myfirsttest" -> STACKS/01 ;
"mysecondtest"
-> STACKS/02 etc ? so all folders/subfolders exist
(STACKS/01/001_DAYS/ZZ/NE_STA1_NE_STA2/ and files there.
4. You have ran "msnoise plot ccftime -f 3 NE.STA1 NE.STA2"
Thomas
On 01/10/2019 14:53, Helena Latecki wrote:
--
Dr. Thomas Lecocq
Geologist - Seismologist
Seismology - Gravimetry
Royal Observatory of Belgium
*
* * * * *
* * * *
---------
http://www.seismology.be
http://msnoise.org
http://twitter.com/#!/Seismologie_be
https://www.facebook.com/seismologie.be
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
Thank you for the fast reply, but the solution
you proposed unfortunately
doesn't work for me.
Function for plotting works fine, but I get an empty graph.
This is what I get in command window:
RuntimeWarning: All-NaN slice encountered
vmax = np.nanmax(data) * 0.9
I checked the parameters in configuration and the path of the folder
where
the stack files are and everything seems to be in
order.
Helena
On Tue, Oct 1, 2019 at 2:32 PM Thomas Lecocq <
Thomas.Lecocq(a)seismology.be>
wrote:
> Hi,
>
> Actually, all you have to do it is to have the right data structure
> (STACKS/filterid/...)
>
> and pass the "-f" parameter to the plots, e.g. msnoise plot ccftime -f
99
and even if the filter doens't exist, you'll still be able to plot the
results (the title of the plot will be replaced by Zeros).
Thomas
On 01/10/2019 14:30, Helena Latecki wrote:
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise Hello,
I was wondering if it's possible to use msnoise plot functions for data
from different analyzes? To be more precise, I would like to plot
interferograms for stacks I have saved from previous study without me
going
through processes of scanning archive,
computing-cc and stacking. I
assume
I would have to populate station table with
station names I used and
create
filter with the appropriate name.
Thank you in advance!
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
--
Dr. Thomas Lecocq
Geologist - Seismologist
Seismology - Gravimetry
Royal Observatory of Belgium
*
* * * * *
* * * *
---------
http://www.seismology.be
http://msnoise.org
http://twitter.com/#!/Seismologie_be
https://www.facebook.com/seismologie.be
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
2140
days inactive
2141
days old
4 comments
2 participants
participants (2)
-
Helena Latecki -
Thomas Lecocq