Cannot proceed to stacking as "Found 000 updated days" - MSNoise - KSB-ORB Mailing Lists

17 Feb 2015

Dear all,

I have computed the daily cross-correlations between two stations but I
cannot proceed to the stacking as "Found 000 updated days".
I tried to continue with the stacking process immediately after the CC
computations, so there was no need, for example, to give an interval to
search for modified CC.
Do I miss any detail about this issue? It is something that I did not
face it before.
Thank you very much in advance.

Here are the last lines of the terminal: 

.
.
.
GR.KALE..HHZ | 2010-12-22T00:00:00.000000Z - 2010-12-22T05:34:03.840000Z
| 100.0 Hz, 2004385 samples
GR.KALE..HHZ | 2010-12-22T05:34:24.450000Z - 2010-12-22T21:18:38.300000Z
| 100.0 Hz, 5665386 samples
GR.KALE..HHZ | 2010-12-22T21:18:46.555000Z - 2010-12-22T21:20:00.705000Z
| 100.0 Hz, 7416 samples
GR.KALE..HHZ | 2010-12-22T21:20:08.950000Z - 2010-12-22T23:59:59.990000Z
| 100.0 Hz, 959105 samples
2015-02-17 14:37:57 [DEBUG] GR.KALE.Z Slicing Stream to
2010-12-22T00:00:00.000000Z:2010-12-22T23:59:59.990000Z
2015-02-17 14:37:57 [DEBUG] GR.KALE.Z Lowpass at 8.00 Hz
2015-02-17 14:37:58 [DEBUG] GR.KALE.Z Highpass at 0.01 Hz
2015-02-17 14:37:58 [DEBUG] GR.KALE.Z Downsample to 20.0 Hz
2015-02-17 14:37:59 [INFO] Pre-Whitening Traces
2015-02-17 14:37:59 [INFO] Processing CC
2015-02-17 14:38:00 [INFO] Job Finished. It took 11.23 seconds
2015-02-17 14:38:00 [INFO] *** Finished: Compute CC ***
dimitris@dimitris-desktop:~/msnoise$ python s04stack.py -r -m
2015-02-17 14:39:42 [INFO] Starting this program with: ref=True,
mov=True, interval=1
2015-02-17 14:39:42 [INFO] *** Starting: REF Stack ***
2015-02-17 14:39:42 [DEBUG] Starting the ref stack
2015-02-17 14:39:42 [DEBUG] Processing HA_KALE:HP_EFP-ZZ-1
2015-02-17 14:39:42 [DEBUG] Found 000 updated days
2015-02-17 14:39:42 [INFO] *** Finished: REF Stack ***
2015-02-17 14:39:42 [INFO] *** Starting: MOV Stack ***
2015-02-17 14:39:42 [DEBUG] Starting the mov stack
2015-02-17 14:39:42 [DEBUG] Processing HA_KALE:HP_EFP-ZZ-1
2015-02-17 14:39:42 [DEBUG] Found 000 updated days
2015-02-17 14:39:42 [INFO] *** Finished: MOV Stack *** 

...
 From dgiannopoulos(a)upatras.gr  Tue Feb 17 14:52:30 2015
Return-Path: &lt;dgiannopoulos(a)upatras.gr&gt;
X-Original-To: msnoise(a)mailman-as.oma.be
Delivered-To: msnoise(a)mailman-as.oma.be
Received: from nic.upatras.gr (nic.upatras.gr [150.140.129.30])
	by mailman-as.oma.be (Postfix) with ESMTP id 3FFDE23619
	for &lt;msnoise(a)mailman-as.oma.be&gt;be>; Tue, 17 Feb 2015 14:52:30 +0000 (UTC)
Received: from localhost (nic.upatras.gr [127.0.0.1])
	by nic.upatras.gr (Postfix) with ESMTP id AD211275885
	for &lt;msnoise(a)mailman-as.oma.be&gt;be>; Tue, 17 Feb 2015 16:52:14 +0200 (EET)
X-Virus-Scanned: amavisd-new at upatras.gr
Received: from nic.upatras.gr ([127.0.0.1])
	by localhost (nic.upatras.gr [127.0.0.1]) (amavisd-new, port 10024)
	with ESMTP id U-T89lYzDQ2a for &lt;msnoise(a)mailman-as.oma.be&gt;be>;
	Tue, 17 Feb 2015 16:52:14 +0200 (EET)
Received: from mail.upatras.gr (patreas.upatras.gr [150.140.129.29])
	by nic.upatras.gr (Postfix) with ESMTP
	for &lt;msnoise(a)mailman-as.oma.be&gt;be>; Tue, 17 Feb 2015 16:52:14 +0200 (EET)
Received: from mail1.upatras.gr (peacock.upnet.gr [150.140.129.41])
	by mail.upatras.gr (Postfix) with ESMTP id EDA6E593E39
	for &lt;msnoise(a)mailman-as.oma.be&gt;be>; Tue, 17 Feb 2015 16:52:11 +0200 (EET)
MIME-Version: 1.0
Date: Tue, 17 Feb 2015 16:52:14 +0200
From: Dimitris Giannopoulos &lt;dgiannopoulos(a)upatras.gr&gt;
To: msnoise(a)mailman-as.oma.be
Organization: University of Patras, Department of Geology, Seismological Lab.
In-Reply-To: &lt;6b8bf2c1af693878345185e6c5df731b(a)upatras.gr&gt;
References: &lt;6b8bf2c1af693878345185e6c5df731b(a)upatras.gr&gt;
Message-ID: &lt;1ccaa8c3e7332f4d0f315b68df6a038f(a)upatras.gr&gt;
X-Sender: dgiannopoulos(a)upatras.gr
User-Agent: Roundcube Webmail/1.0.4
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
X-Content-Filtered-By: Mailman/MimeDel 2.1.12
Subject: [MSNoise] Cannot proceed to stacking as "Found 000 updated days"
X-BeenThere: msnoise(a)mailman-as.oma.be
X-Mailman-Version: 2.1.12
Precedence: list
Reply-To: Python Package for Monitoring Seismic Velocity Changes using
	Ambient Seismic Noise &lt;msnoise(a)mailman-as.oma.be&gt;
List-Id: Python Package for Monitoring Seismic Velocity Changes using Ambient
	Seismic Noise <msnoise.mailman-as.oma.be>
List-Unsubscribe: <http://mailman-as.oma.be/mailman/options/msnoise>,
	<mailto:msnoise-request@mailman-as.oma.be?subject=unsubscribe>
List-Archive: <http://mailman-as.oma.be/pipermail/msnoise/>
List-Post: <mailto:msnoise@mailman-as.oma.be>
List-Help: <mailto:msnoise-request@mailman-as.oma.be?subject=help>
List-Subscribe: <http://mailman-as.oma.be/mailman/listinfo/msnoise>,
	<mailto:msnoise-request@mailman-as.oma.be?subject=subscribe>
X-List-Received-Date: Tue, 17 Feb 2015 14:52:30 -0000

I found out what the problem was. It was my fault.
There was a mismatch between the names of CC jobs in the database
(GR.KALE:GR.EFP) and those that the software was expected to find
(HA.KALE:HP.EFP) because of the existence of different network codes. 

...
  Dear all,

 I have computed the daily cross-correlations between two stations but I cannot proceed to
the stacking as "Found 000 updated days".
 I tried to continue with the stacking process immediately after the CC computations, so
there was no need, for example, to give an interval to search for modified CC.
 Do I miss any detail about this issue? It is something that I did not face it before.
 Thank you very much in advance.

 Here are the last lines of the terminal: 

 .
 .
 .
 GR.KALE..HHZ | 2010-12-22T00:00:00.000000Z - 2010-12-22T05:34:03.840000Z | 100.0 Hz,
2004385 samples
 GR.KALE..HHZ | 2010-12-22T05:34:24.450000Z - 2010-12-22T21:18:38.300000Z | 100.0 Hz,
5665386 samples
 GR.KALE..HHZ | 2010-12-22T21:18:46.555000Z - 2010-12-22T21:20:00.705000Z | 100.0 Hz, 7416
samples
 GR.KALE..HHZ | 2010-12-22T21:20:08.950000Z - 2010-12-22T23:59:59.990000Z | 100.0 Hz,
959105 samples
 2015-02-17 14:37:57 [DEBUG] GR.KALE.Z Slicing Stream to
2010-12-22T00:00:00.000000Z:2010-12-22T23:59:59.990000Z
 2015-02-17 14:37:57 [DEBUG] GR.KALE.Z Lowpass at 8.00 Hz
 2015-02-17 14:37:58 [DEBUG] GR.KALE.Z Highpass at 0.01 Hz
 2015-02-17 14:37:58 [DEBUG] GR.KALE.Z Downsample to 20.0 Hz
 2015-02-17 14:37:59 [INFO] Pre-Whitening Traces
 2015-02-17 14:37:59 [INFO] Processing CC
 2015-02-17 14:38:00 [INFO] Job Finished. It took 11.23 seconds
 2015-02-17 14:38:00 [INFO] *** Finished: Compute CC ***
 dimitris@dimitris-desktop:~/msnoise$ python s04stack.py -r -m
 2015-02-17 14:39:42 [INFO] Starting this program with: ref=True, mov=True, interval=1
 2015-02-17 14:39:42 [INFO] *** Starting: REF Stack ***
 2015-02-17 14:39:42 [DEBUG] Starting the ref stack
 2015-02-17 14:39:42 [DEBUG] Processing HA_KALE:HP_EFP-ZZ-1
 2015-02-17 14:39:42 [DEBUG] Found 000 updated days
 2015-02-17 14:39:42 [INFO] *** Finished: REF Stack ***
 2015-02-17 14:39:42 [INFO] *** Starting: MOV Stack ***
 2015-02-17 14:39:42 [DEBUG] Starting the mov stack
 2015-02-17 14:39:42 [DEBUG] Processing HA_KALE:HP_EFP-ZZ-1
 2015-02-17 14:39:42 [DEBUG] Found 000 updated days
 2015-02-17 14:39:42 [INFO] *** Finished: MOV Stack ***  
...
 From thompsong(a)mail.usf.edu  Tue Feb 17 19:41:11 2015
Return-Path: &lt;thompsong(a)mail.usf.edu&gt;
X-Original-To: msnoise(a)mailman-as.oma.be
Delivered-To: msnoise(a)mailman-as.oma.be
Received: from mail-qg0-f43.google.com (mail-qg0-f43.google.com
	[209.85.192.43])
	by mailman-as.oma.be (Postfix) with ESMTP id AF79923657
	for &lt;msnoise(a)mailman-as.oma.be&gt;be>; Tue, 17 Feb 2015 19:41:11 +0000 (UTC)
Received: by mail-qg0-f43.google.com with SMTP id i50so29641785qgf.2
	for &lt;msnoise(a)mailman-as.oma.be&gt;be>; Tue, 17 Feb 2015 11:40:55 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
	d=mail.usf.edu; s=googleapps;
	h=mime-version:in-reply-to:references:date:message-id:subject:from:to
	:content-type; bh=BLre+DohkGaDHp3r0qGg4Uqb1o6A9jXdqKHXubDsWlY=;
	b=OmXejfo0EXn8MBsplVNuz6rPH531H1Zj4C1iUKWp9PAjXrwbeJTzR9WG6OJMlltd6Q
	RMmbZw8ZpcS/6hcURQ2od6XQy0pSUDexSI3SF9qQyG0CH4urPkQIh1tpEX4X1LolJUda
	A5vv4UU+3c/SmXve45iScuPZpwMBYosiQZWSo=
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
	d=1e100.net; s=20130820;
	h=x-gm-message-state:mime-version:in-reply-to:references:date
	:message-id:subject:from:to:content-type;
	bh=BLre+DohkGaDHp3r0qGg4Uqb1o6A9jXdqKHXubDsWlY=;
	b=LafqInDfLRcrz/ugRaRl8MzCy777kOL/AD/CvvebLBdNFPyKDWv43j6va7aGnx0mV8
	NY6gAgWru8jTg+Snk8CmDTCG4olwQjAAjhFDHe3xuJhx3G8/6+OBypKC311uHOEnLIRA
	p/rQSxG632dHfCOVnnEYNqGTLqG9J0Iqdt+HPLHKMyCqSj5OjIJIizDGe+7PMMMuUS6z
	0M7W6XK810NcRsc2qiMrTLytvtqFkO98yW1AeqgtYgjE8HkX9YcUqgM/vsSSwvRnhZtZ
	M1+OKB67Bz0E84gCxzjkJHBxM07zIUXbRLPXl35RE93sMkk8ikX2+0raFVYZEXIIqvii
	ad8g==
X-Gm-Message-State:
ALoCoQkIBamwbly9Rtowc2Zm2D2jCzn0Kh3+ajE6WeKth4ZJpuhAb12zKqc02wn9a80jZ5r6snn8
MIME-Version: 1.0
X-Received: by 10.140.217.200 with SMTP id n191mr1184099qhb.29.1424202055139; 
	Tue, 17 Feb 2015 11:40:55 -0800 (PST)
Received: by 10.140.106.182 with HTTP; Tue, 17 Feb 2015 11:40:55 -0800 (PST)
In-Reply-To:
&lt;1e808d4fa53a43798dbfe236265e1fdb(a)SN2PR0801MB623.namprd08.prod.outlook.com&gt;
References: &lt;CAJskVP=XYyRO1G6uuxdEVSS+LVGg3X-8psAhp-+CS6nyALA3jw(a)mail.gmail.com&gt;
	&lt;1e808d4fa53a43798dbfe236265e1fdb(a)SN2PR0801MB623.namprd08.prod.outlook.com&gt;
Date: Tue, 17 Feb 2015 14:40:55 -0500
Message-ID: &lt;CAHEx3ayExp0jn9i3QXKBw6iAuo_NtT1g3_R11p8KLNSnOBA=Lw(a)mail.gmail.com&gt;
From: Glenn Thompson &lt;thompsong(a)mail.usf.edu&gt;
To: Python Package for Monitoring Seismic Velocity Changes using Ambient
	Seismic Noise &lt;msnoise(a)mailman-as.oma.be&gt;
X-Mailman-Approved-At: Tue, 17 Feb 2015 21:31:12 +0000
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
X-Content-Filtered-By: Mailman/MimeDel 2.1.12
Subject: Re: [MSNoise] Installation Challenges
X-BeenThere: msnoise(a)mailman-as.oma.be
X-Mailman-Version: 2.1.12
Precedence: list
Reply-To: Python Package for Monitoring Seismic Velocity Changes using
	Ambient Seismic Noise &lt;msnoise(a)mailman-as.oma.be&gt;
List-Id: Python Package for Monitoring Seismic Velocity Changes using Ambient
	Seismic Noise <msnoise.mailman-as.oma.be>
List-Unsubscribe: <http://mailman-as.oma.be/mailman/options/msnoise>,
	<mailto:msnoise-request@mailman-as.oma.be?subject=unsubscribe>
List-Archive: <http://mailman-as.oma.be/pipermail/msnoise/>
List-Post: <mailto:msnoise@mailman-as.oma.be>
List-Help: <mailto:msnoise-request@mailman-as.oma.be?subject=help>
List-Subscribe: <http://mailman-as.oma.be/mailman/listinfo/msnoise>,
	<mailto:msnoise-request@mailman-as.oma.be?subject=subscribe>
X-List-Received-Date: Tue, 17 Feb 2015 19:41:12 -0000

I just tried installing the required packages on Red Hat Linux 6 too with
the same results as Adebayo. I was able to install libsamplerate (not
libsamplerate0):

yum install libsamplerate

But not libsamplerate-dev (or libsamplerate0-dev)

And then the command:

easy_install scikits.samplerate

still failed with the same error as it did for Adebayo.

error: SRC (http://www.mega-nerd.com/SRC/) library not found.  Directories
to search

for the libraries can be specified in the site.cfg file, in section

[samplerate].

I have not been able to find out where on my system libsamplerate has
installed, so nothing to put in site.cfg.

Have any users got MSNoise to work on a Red Hat or CentOs system?

***************************************************************************=
********************
                                                  Glenn Thompson
Research Assistant Professor                                      Email:
thompsong(a)usf.edu
Volcano-Seismology                                                     Tel:
    813-974-3702
School of Geosciences, USF                                        Office:
SCA 214
4202 E Fowler Ave., NES107                                       Lab: SCA
210
Tampa, FL 33620
***************************************************************************=
********************

On Mon, Feb 9, 2015 at 11:15 AM, Thomas Lecocq &lt;thomas.lecocq(a)oma.be&gt; wrote=
:

...
  Hi,

 for the first part: you have to find the libsamplerate0 & -dev for your
 machine, I can't help on that,

 then, It's on the documentation:

 http://msnoise.org/doc/installation.html#samplerate

 Best regards,

 Thomas

 Le 09/02/2015 17:12, Adebayo Ojo a =C3=A9crit :
 > Dear All,
 >
 > After much attempt to install the MSnoise software on my Centos 7 Linux
 > system, i feel i should ask for some guidance.
 >
 > [root@localhost ojo]# sudo yum install libsamplerate0 libsamplerate0-de= v
...
   Loaded
plugins: fastestmirror, langpacks, priorities
 Loading mirror speeds from cached hostfile
   * base: centos.ustc.edu.cn
   * epel: mirrors.ustc.edu.cn
   * extras: centos.ustc.edu.cn
   * rpmforge: mirror-fpt-telecom.fpt.net
   * updates: centos.ustc.edu.cn
 No package libsamplerate0 available.
 No package libsamplerate0-dev available.

 [root@localhost ojo]# easy_install scikits.samplerate
 Searching for scikits.samplerate
 Reading https://pypi.python.org/simple/scikits.samplerate/
 Best match: scikits.samplerate 0.3.3
 Downloading

 https://pypi.python.org/packages/source/s/scikits.samplerate/scikits.samp=
lerate-0.3.3.tar.gz#md5=3D96c8d8ba3aa95a9db15994f78792efb4
...
   Processing
scikits.samplerate-0.3.3.tar.gz
 Writing /tmp/easy_install-aF6CLy/scikits.samplerate-0.3.3/setup.cfg
 Running scikits.samplerate-0.3.3/setup.py -q bdist_egg --dist-dir
 /tmp/easy_install-aF6CLy/scikits.samplerate-0.3.3/egg-dist-tmp-L4szBy
 error: SRC (http://www.mega-nerd.com/SRC/) library not found.  Directories
  to search
 for the libraries can be specified in the site.cfg file, in section
 [samplerate].

 Kindly advice me. Thank you.
 _______________________________________________
 MSNoise mailing list
 MSNoise(a)mailman-as.oma.be
 http://mailman-as.oma.be/mailman/listinfo/msnoise 
 _______________________________________________
 MSNoise mailing list
 MSNoise(a)mailman-as.oma.be
 http://mailman-as.oma.be/mailman/listinfo/msnoise