3 Oct
2014
3 Oct
'14
11:19 p.m.
Hi Carmelo,
Tom suggested the issue may be linux related, and proposed some hard-coding
of the filters, but I have not had any problems on two linux installs (both
fedora and ubuntu) defining the filters. They are defined in the
configurator:
http://msnoise.org/doc/workflow.html#module-MSNoise.s001configurator
Do you see the filter tab on the left? This should open up boxes in the gui
where you can set the filters according to your desires. If your system
behaves differently, please describe in detail.
Cheers,
Kasper
On 4 October 2014 10:05, Sammarco, Carmelo <carmelosammarco(a)abdn.ac.uk>
wrote:
Dear Thomas, Aurelien and MsNoise users,
When I run s03compute_cc.py the terminal shows: 'NO FILTERS DEFINED,
exiting'. If I go in the configurator and in the filter Tab the section is
blank. In which way can I populate the filter tab?? Someone could explain
me in which way can I fix the problem?? I am using linux and Mysql. Can I
add the filters information on the database with phpmyadmin? And if yes in
which way? I am a PhD student of the university of Aberdeen and I need to
fix this problem as soon as possible. Please someone help me please. I need
to do a lot of job so I can't rerun like Aurelien says:
"IF you rerun s03compute_cc.py after this error, it will jump to the next
job. It's a dirty quick fix and it does not help if the error happens every
two days of data..."
Thank you very much for the info!! Better than nothing.. I appreciate a
lot but I am looking if possible for a permanent solution.
I hope to recieve your replay.
Cheers,
Carmelo
The University of Aberdeen is a charity registered in Scotland, No
SC013683.
Tha Oilthigh Obar Dheathain na charthannas clàraichte ann an Alba, Àir.
SC013683.
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
3 Oct
3 Oct
11:47 p.m.
New subject: Problem with the s03compute_cc.py
Hi Carmelo,
I was actually answering about Kasper's issue.
For the filter problem, once you are conected to localhost/phpmyadmin, you
go into your database then to the filter tab. Here you should be able to
click on modify and set each parameter for each filter.
Hope it helps.
Aurelien.
2014-10-03 17:19 GMT-04:00 Kasper van Wijk <k.vanwijk(a)auckland.ac.nz>nz>:
Hi Carmelo,
Tom suggested the issue may be linux related, and proposed some hard-coding
of the filters, but I have not had any problems on two linux installs (both
fedora and ubuntu) defining the filters. They are defined in the
configurator:
http://msnoise.org/doc/workflow.html#module-MSNoise.s001configurator
Do you see the filter tab on the left? This should open up boxes in the gui
where you can set the filters according to your desires. If your system
behaves differently, please describe in detail.
Cheers,
Kasper
On 4 October 2014 10:05, Sammarco, Carmelo <carmelosammarco(a)abdn.ac.uk>
wrote:
--
==========================
Aurelien Mordret
Postdoctoral fellow
Department of Earth, Atmospheric and Planetary Sciences
Massachusetts Institute of Technology
54-526
Cambridge, MA 02139-4307
e-mail: mordret(a)mit.edu
web: http://web.mit.edu/mordret/www
Dear Thomas, Aurelien and MsNoise users,
When I run s03compute_cc.py the terminal shows: 'NO FILTERS DEFINED,
exiting'. If I go in the configurator and in the filter Tab the section
is
blank. In which way can I populate the filter
tab?? Someone could explain
me in which way can I fix the problem?? I am using linux and Mysql. Can I
add the filters information on the database with phpmyadmin? And if yes
in
which way? I am a PhD student of the university
of Aberdeen and I need to
fix this problem as soon as possible. Please someone help me please. I
need
to do a lot of job so I can't rerun like
Aurelien says:
"IF you rerun s03compute_cc.py after this error, it will jump to the next
job. It's a dirty quick fix and it does not help if the error happens
every
two days of data..."
Thank you very much for the info!! Better than nothing.. I appreciate a
lot but I am looking if possible for a permanent solution.
I hope to recieve your replay.
Cheers,
Carmelo
The University of Aberdeen is a charity registered in Scotland, No
SC013683.
Tha Oilthigh Obar Dheathain na charthannas clàraichte ann an Alba, Àir.
SC013683.
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
4 Oct
4 Oct
2:56 a.m.
New subject: Problem with the s03compute_cc.py
dear all,
Below in the previous mail I explained the problem. Thank you for the suggestions but they
don't work.
I tried to modify the filter tab by myphpadmin like told me Aurelien.. but it
doesn't work.
(I attached some pictures.. )
On the configurator the filters tab is still blank.. So now I don't know what I can
do.. But is there a way to star the cross correlation and fix the problem?? Could be a
problem of Linux Ubuntu or some configuration??
cheers,
Carmelo
________________________________________
From: msnoise-bounces(a)mailman-as.oma.be <msnoise-bounces(a)mailman-as.oma.be> on
behalf of Aurélien Mordret <mordret(a)mit.edu>
Sent: 03 October 2014 22:47
To: Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic Noise
Subject: Re: [MSNoise] Problem with the s03compute_cc.py
Hi Carmelo,
I was actually answering about Kasper's issue.
For the filter problem, once you are conected to localhost/phpmyadmin, you
go into your database then to the filter tab. Here you should be able to
click on modify and set each parameter for each filter.
Hope it helps.
Aurelien.
2014-10-03 17:19 GMT-04:00 Kasper van Wijk <k.vanwijk(a)auckland.ac.nz>nz>:
Hi Carmelo,
Tom suggested the issue may be linux related, and proposed some hard-coding
of the filters, but I have not had any problems on two linux installs (both
fedora and ubuntu) defining the filters. They are defined in the
configurator:
http://msnoise.org/doc/workflow.html#module-MSNoise.s001configurator
Do you see the filter tab on the left? This should open up boxes in the gui
where you can set the filters according to your desires. If your system
behaves differently, please describe in detail.
Cheers,
Kasper
On 4 October 2014 10:05, Sammarco, Carmelo <carmelosammarco(a)abdn.ac.uk>
wrote:
--
==========================
Aurelien Mordret
Postdoctoral fellow
Department of Earth, Atmospheric and Planetary Sciences
Massachusetts Institute of Technology
54-526
Cambridge, MA 02139-4307
e-mail: mordret(a)mit.edu
web: http://web.mit.edu/mordret/www
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
The University of Aberdeen is a charity registered in Scotland, No SC013683.
Tha Oilthigh Obar Dheathain na charthannas clàraichte ann an Alba, Àir. SC013683.
Dear Thomas, Aurelien and MsNoise users,
When I run s03compute_cc.py the terminal shows: 'NO FILTERS DEFINED,
exiting'. If I go in the configurator and in the filter Tab the section
is
blank. In which way can I populate the filter
tab?? Someone could explain
me in which way can I fix the problem?? I am using linux and Mysql. Can I
add the filters information on the database with phpmyadmin? And if yes
in
which way? I am a PhD student of the university
of Aberdeen and I need to
fix this problem as soon as possible. Please someone help me please. I
need
to do a lot of job so I can't rerun like
Aurelien says:
"IF you rerun s03compute_cc.py after this error, it will jump to the next
job. It's a dirty quick fix and it does not help if the error happens
every
two days of data..."
Thank you very much for the info!! Better than nothing.. I appreciate a
lot but I am looking if possible for a permanent solution.
I hope to recieve your replay.
Cheers,
Carmelo
The University of Aberdeen is a charity registered in Scotland, No
SC013683.
Tha Oilthigh Obar Dheathain na charthannas clàraichte ann an Alba, Àir.
SC013683.
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
9:54 a.m.
New subject: Problem with the s03compute_cc.py
Carmelo,
When you are on the filter tab in phpmyadmin, simply click on "insert"
and add one filter (fill in values) and save it. Then it should appear
in the configurator !
Best
Thomas
Le 4/10/2014 02:56, Sammarco, Carmelo a écrit :
dear all,
Below in the previous mail I explained the problem. Thank you for the suggestions but
they don't work.
I tried to modify the filter tab by myphpadmin like told me Aurelien.. but it
doesn't work.
(I attached some pictures.. )
On the configurator the filters tab is still blank.. So now I don't know what I can
do.. But is there a way to star the cross correlation and fix the problem?? Could be a
problem of Linux Ubuntu or some configuration??
cheers,
Carmelo
________________________________________
From: msnoise-bounces(a)mailman-as.oma.be <msnoise-bounces(a)mailman-as.oma.be> on
behalf of Aurélien Mordret <mordret(a)mit.edu>
Sent: 03 October 2014 22:47
To: Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic Noise
Subject: Re: [MSNoise] Problem with the s03compute_cc.py
Hi Carmelo,
I was actually answering about Kasper's issue.
For the filter problem, once you are conected to localhost/phpmyadmin, you
go into your database then to the filter tab. Here you should be able to
click on modify and set each parameter for each filter.
Hope it helps.
Aurelien.
2014-10-03 17:19 GMT-04:00 Kasper van Wijk <k.vanwijk(a)auckland.ac.nz>nz>:
Hi Carmelo,
Tom suggested the issue may be linux related, and proposed some hard-coding
of the filters, but I have not had any problems on two linux installs (both
fedora and ubuntu) defining the filters. They are defined in the
configurator:
http://msnoise.org/doc/workflow.html#module-MSNoise.s001configurator
Do you see the filter tab on the left? This should open up boxes in the gui
where you can set the filters according to your desires. If your system
behaves differently, please describe in detail.
Cheers,
Kasper
On 4 October 2014 10:05, Sammarco, Carmelo <carmelosammarco(a)abdn.ac.uk>
wrote:
--
==========================
Aurelien Mordret
Postdoctoral fellow
Department of Earth, Atmospheric and Planetary Sciences
Massachusetts Institute of Technology
54-526
Cambridge, MA 02139-4307
e-mail: mordret(a)mit.edu
web: http://web.mit.edu/mordret/www
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
The University of Aberdeen is a charity registered in Scotland, No SC013683.
Tha Oilthigh Obar Dheathain na charthannas clàraichte ann an Alba, Àir. SC013683.
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise Dear Thomas, Aurelien and MsNoise users,
When I run s03compute_cc.py the terminal shows: 'NO FILTERS DEFINED,
exiting'. If I go in the configurator and in the filter Tab the section
is
blank. In which way can I populate the filter
tab?? Someone could explain
me in which way can I fix the problem?? I am using linux and Mysql. Can I
add the filters information on the database with phpmyadmin? And if yes
in
which way? I am a PhD student of the university
of Aberdeen and I need to
fix this problem as soon as possible. Please someone help me please. I
need
to do a lot of job so I can't rerun like
Aurelien says:
"IF you rerun s03compute_cc.py after this error, it will jump to the next
job. It's a dirty quick fix and it does not help if the error happens
every
two days of data..."
Thank you very much for the info!! Better than nothing.. I appreciate a
lot but I am looking if possible for a permanent solution.
I hope to recieve your replay.
Cheers,
Carmelo
The University of Aberdeen is a charity registered in Scotland, No
SC013683.
Tha Oilthigh Obar Dheathain na charthannas clàraichte ann an Alba, Àir.
SC013683.
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
5 Oct
5 Oct
8:38 p.m.
New subject: Problem with the s03compute_cc.py
Dear Thomas,
Thank you very much!!! now it works!!
cheers,
Carmelo
________________________________________
From: msnoise-bounces(a)mailman-as.oma.be <msnoise-bounces(a)mailman-as.oma.be> on
behalf of Thomas Lecocq <thomas.lecocq(a)seismology.be>
Sent: 04 October 2014 08:54
To: msnoise(a)mailman-as.oma.be
Subject: Re: [MSNoise] Problem with the s03compute_cc.py
Carmelo,
When you are on the filter tab in phpmyadmin, simply click on "insert"
and add one filter (fill in values) and save it. Then it should appear
in the configurator !
Best
Thomas
Le 4/10/2014 02:56, Sammarco, Carmelo a écrit :
dear all,
Below in the previous mail I explained the problem. Thank you for the suggestions but
they don't work.
I tried to modify the filter tab by myphpadmin like told me Aurelien.. but it
doesn't work.
(I attached some pictures.. )
On the configurator the filters tab is still blank.. So now I don't know what I can
do.. But is there a way to star the cross correlation and fix the problem?? Could be a
problem of Linux Ubuntu or some configuration??
cheers,
Carmelo
________________________________________
From: msnoise-bounces(a)mailman-as.oma.be <msnoise-bounces(a)mailman-as.oma.be> on
behalf of Aurélien Mordret <mordret(a)mit.edu>
Sent: 03 October 2014 22:47
To: Python Package for Monitoring Seismic Velocity Changes using Ambient Seismic Noise
Subject: Re: [MSNoise] Problem with the s03compute_cc.py
Hi Carmelo,
I was actually answering about Kasper's issue.
For the filter problem, once you are conected to localhost/phpmyadmin, you
go into your database then to the filter tab. Here you should be able to
click on modify and set each parameter for each filter.
Hope it helps.
Aurelien.
2014-10-03 17:19 GMT-04:00 Kasper van Wijk <k.vanwijk(a)auckland.ac.nz>nz>:
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
The University of Aberdeen is a charity registered in Scotland, No SC013683.
Tha Oilthigh Obar Dheathain na charthannas clàraichte ann an Alba, Àir. SC013683.
Hi Carmelo,
Tom suggested the issue may be linux related, and proposed some hard-coding
of the filters, but I have not had any problems on two linux installs (both
fedora and ubuntu) defining the filters. They are defined in the
configurator:
http://msnoise.org/doc/workflow.html#module-MSNoise.s001configurator
Do you see the filter tab on the left? This should open up boxes in the gui
where you can set the filters according to your desires. If your system
behaves differently, please describe in detail.
Cheers,
Kasper
On 4 October 2014 10:05, Sammarco, Carmelo <carmelosammarco(a)abdn.ac.uk>
wrote:
--
==========================
Aurelien Mordret
Postdoctoral fellow
Department of Earth, Atmospheric and Planetary Sciences
Massachusetts Institute of Technology
54-526
Cambridge, MA 02139-4307
e-mail: mordret(a)mit.edu
web: http://web.mit.edu/mordret/www
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
The University of Aberdeen is a charity registered in Scotland, No SC013683.
Tha Oilthigh Obar Dheathain na charthannas clàraichte ann an Alba, Àir. SC013683.
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise Dear Thomas, Aurelien and MsNoise users,
When I run s03compute_cc.py the terminal shows: 'NO FILTERS DEFINED,
exiting'. If I go in the configurator and in the filter Tab the section
is
blank. In which way can I populate the filter
tab?? Someone could explain
me in which way can I fix the problem?? I am using linux and Mysql. Can I
add the filters information on the database with phpmyadmin? And if yes
in
which way? I am a PhD student of the university
of Aberdeen and I need to
fix this problem as soon as possible. Please someone help me please. I
need
to do a lot of job so I can't rerun like
Aurelien says:
"IF you rerun s03compute_cc.py after this error, it will jump to the next
job. It's a dirty quick fix and it does not help if the error happens
every
two days of data..."
Thank you very much for the info!! Better than nothing.. I appreciate a
lot but I am looking if possible for a permanent solution.
I hope to recieve your replay.
Cheers,
Carmelo
The University of Aberdeen is a charity registered in Scotland, No
SC013683.
Tha Oilthigh Obar Dheathain na charthannas clàraichte ann an Alba, Àir.
SC013683.
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
_______________________________________________
MSNoise mailing list
MSNoise(a)mailman-as.oma.be
http://mailman-as.oma.be/mailman/listinfo/msnoise
3918
days inactive
3920
days old
4 comments
4 participants
participants (4)
-
Aurélien Mordret -
Kasper van Wijk -
Sammarco, Carmelo -
Thomas Lecocq