[MSNoise] Fwd: MSNoise: filters

Hi Hélène, The filters need to be defined in the configurator. Filter bounds define the bandpass that will whitened. Around this whitened part, the spectra will be tapered to 0.+0j. Indeed, I've rechecked the doc, it's not very obvious. Thanks for pointing this out :) I'll try to spend some time on the doc soon. Briefly: each filter is defined with: low : lower frequency of the bandpass high : upper ... mwcs_low : slightly higher than low, it is the lower frequency for which MWCS' weighted linear regression will be estimated mwcs_high : slightly lower than high,... mwcs_wlen : window length for computing the relative delay in the MWCS mwcs_step : step between two windows. if equal to mwcs_wlen: no overlap. rms_threshold: not used any more, should disappear, set it to 0.0. Hope this helps, let me know (via this mailing list, svp.) Thom -------- Message original -------- Sujet: MSNoise: filters Date : Sat, 8 Mar 2014 14:14:33 +0100 Pour : Thomas Lecocq <thomas.lecocq(a)oma.be> Thomas, we solved the problem with scikits_samplerate apprently related to some export in my .bashrc. I am now at s03compute_cc.py and get an error because I did not define any filters: apparently this is not implementted yet (?) , to what these filters correspond? Cheers Helene -----Message d'origine----- From: Thomas Lecocq Sent: Thursday, March 06, 2014 5:45 PM To: Helene.Lyon-Caen(a)ens.fr Subject: Re: scikits Hélène, You could remove the dependency to scikits by using only Decimation, if all your data are in the same sampling rate ! Thom Le 06/03/2014 16:18, Helene Lyon-Caen a écrit :