When I ran python s03compute_cc.py (msnoise version1.2), I encountered memoryerror. Any idea?
The following is output:
Traceback (most recent call last):
File "s03compute_cc.py", line 191, in <module>
tramef_Z = np.zeros((len(stations), len(TimeVec)))
MemoryError
Thanks,
Xiao
Thom,
FWIW: I believe my problem arose (no jobs to do) right from the install
(i.e., these data were fresh). But it is possible I did something else
wrong, of course.
Cheers,
kasper
On 22 November 2013 00:51, Thomas Lecocq <thomas.lecocq(a)oma.be> wrote:
> Hi Esteban
> Le 20/11/2013 17:59, Esteban Chaves a écrit :
> > Hi All,
> >
> > I got the same issue. My data is according to BUD format and I got this:
> >
> > > > python s02new_jobs.py:
> >
> >>> File ?s02new_jobs.py, line 89, in <module>
> >>> if day != old_day and day_pairs != []:
> >>> NameError: name ?day? is not defined
> Well, yes, it's most probably the same reason. Either your data archive
> has no changes between 2 runs or there is another problem. I'll commit a
> bugfix tomorrow eve max.
> >
> > Thomas; I did sent my email to apply to the workshop after AGU. I want to
> > know if you have some schedule or place where gonna be the workshop.
> > Besides, maybe you can help me with this problems in the workshop, just
> in
> > case I can't fix it before that.
> All the participants will get an email tonight with more info... :-)
>
> Cheers
>
> Thom
> >
> > Thanks in advance,
> >
> >
> >
> > Esteban J. Chaves
> > PhD Student in Seismology
> > Earth and Planetary Sciences
> > Earth and Marine Science Building
> > office C317B
> > University of California, Santa Cruz
> >
> >
> >
> > On Tue, Nov 19, 2013 at 8:37 PM, <msnoise-request(a)mailman-as.oma.be>
> wrote:
> >
> >> Send MSNoise mailing list submissions to
> >> msnoise(a)mailman-as.oma.be
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >> or, via email, send a message with subject or body 'help' to
> >> msnoise-request(a)mailman-as.oma.be
> >>
> >> You can reach the person managing the list at
> >> msnoise-owner(a)mailman-as.oma.be
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of MSNoise digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >> 1. Re: s02new_jobs (Kasper van Wijk)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Wed, 20 Nov 2013 17:36:27 +1300
> >> From: Kasper van Wijk <k.vanwijk(a)auckland.ac.nz>
> >> To: Python Package for Monitoring Seismic Velocity Changes using
> >> Ambient Seismic Noise <msnoise(a)mailman-as.oma.be>
> >> Subject: Re: [MSNoise] s02new_jobs
> >> Message-ID:
> >> <
> >> CAN-+WRhVirJQ0CCBKS5WFFRhahwN2cXT7RL6HkPD97ZjcJ_bww(a)mail.gmail.com>
> >> Content-Type: text/plain; charset="windows-1252"
> >>
> >> Thomas, we reinstalled with your latest versions, and now have the same
> >> problem as Esteban, I am afraid:
> >>
> >> [kasper@kvan637-277769 MSNoise-master]$ python s02new_jobs.py
> >> 2013-11-20 17:30:32,540 [INFO] *** Starting: New Jobs ***
> >> Traceback (most recent call last):
> >> File "s02new_jobs.py", line 89, in <module>
> >> if day != old_day and day_pairs != []:
> >> NameError: name 'day' is not defined
> >>
> >> My data structure is BUD (and appears correct in the configurator
> (snapshot
> >> attached), and there is more than one day's worth of data in the
> structure
> >> to correlate. File names are like this:
> >>
> >> ABAZ.NZ..EHE.2013.322 ABAZ.NZ..EHN.2013.322 ABAZ.NZ..EHZ.2013.322
> >> ABAZ.NZ..EHE.2013.323 ABAZ.NZ..EHN.2013.323 ABAZ.NZ..EHZ.2013.323
> >>
> >> I did notice among a large amount of output to screen that there was an
> >> error in
> >>
> >>> python s01scan_archive.py init
> >> ......
> >> 2013-11-20 17:27:11,154 [DEBUG] Already Exists: "ABAZ.NZ..EHZ.2013.322"
> >> (read:0.19 (0.22) seconds | save:0.0275 seconds)
> >> Traceback (most recent call last):
> >> File "s01scan_archive.py", line 203, in <module>
> >> t.start()
> >> File "/usr/lib64/python2.7/threading.py", line 746, in start
> >> _start_new_thread(self.__bootstrap, ())
> >> thread.error: can't start new thread
> >> 2013-11-20 17:27:11,324 [DEBUG] Already Exists: "ABAZ.NZ..EHZ.2013.323"
> >> (read:0.16 (0.16) seconds | save:0.0038 seconds)
> >> .....
> >>
> >> but it did finish the scanning.
> >>
> >> I am running this under linux, FC19.
> >>
> >> Cheers,
> >> Kasper
> >>
> >>
> >> On 19 November 2013 19:09, Thomas Lecocq <thomas.lecocq(a)oma.be> wrote:
> >>
> >>> Hi Esteban,
> >>>
> >>> Le 19/11/2013 00:59, Esteban Chaves Sibaja a ?crit :
> >>>> Hi,
> >>>>
> >>>> I?m trying to run my data as example: just 2 stations and ech record
> >> has
> >>> 24 hours (SAC format):
> >>>> /DATA/YZ/MIRM/MIRM.YZ.HHZ.2013.199
> >>>> /DATA/YZ/GRAS/GRAS.YZ.CR.HHZ.2013.199
> >>>>
> >>>>
> >>>> But I got the next error after type >> python s02new_jobs.py:
> >>>>
> >>>> File ?s02new_jobs.py, line 89, in <module>
> >>>> if day != old_day and day_pairs != []:
> >>>> NameError: name ?day? is not defined
> >>>>
> >>>> So. What should be the correct format of the input data? SAC or mseed?
> >>>> and how can I solve this time problem?
> >>> Currently, only the archive formats defined as :
> >>>
> >>> data_structure['SDS'] =
> >>> "YEAR/NET/STA/CHAN.TYPE/NET.STA.LOC.CHAN.TYPE.YEAR.DAY"
> >>> data_structure['BUD'] = "NET/STA/STA.NET.LOC.CHAN.YEAR.DAY"
> >>> data_structure['IDDS'] =
> >>> "YEAR/NET/STA/CHAN.TYPE/DAY/NET.STA.LOC.CHAN.TYPE.YEAR.DAY.HOUR"
> >>> data_structure['PDF'] =
> >>> "YEAR/STA/CHAN.TYPE/NET.STA.LOC.CHAN.TYPE.YEAR.DAY"
> >>>
> >>>
> >>> are known by MSNoise. You have to define your own format in the
> >>> data_structures.py file
> >>>
> >>> data_structure['NAME'] = "NET/STA/STA.NET.LOC.CHAN.YEAR.DAY"
> >>>
> >>> Once done, the "s002populate_station_table.py" script should find your
> >>> stations/network and the rest of the workflow should work fine.
> >>>
> >>> Let me know how it goes,
> >>>
> >>> Thomas
> >>>
> >>>> Sorry about the question, but I?ll appreciate the help to solve it and
> >>> continue using my data.
> >>>> Esteban
> >>>>
> >>>>
> >>>> On Nov 18, 2013, at 4:00 AM, msnoise-request(a)mailman-as.oma.be wrote:
> >>>>
> >>>>> Send MSNoise mailing list submissions to
> >>>>> msnoise(a)mailman-as.oma.be
> >>>>>
> >>>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>>>> or, via email, send a message with subject or body 'help' to
> >>>>> msnoise-request(a)mailman-as.oma.be
> >>>>>
> >>>>> You can reach the person managing the list at
> >>>>> msnoise-owner(a)mailman-as.oma.be
> >>>>>
> >>>>> When replying, please edit your Subject line so it is more specific
> >>>>> than "Re: Contents of MSNoise digest..."
> >>>>>
> >>>>>
> >>>>> Today's Topics:
> >>>>>
> >>>>> 1. Re: MSNoise Digest, Vol 2, Issue 4 (Thomas Lecocq)
> >>>>>
> >>>>>
> >>>>>
> ----------------------------------------------------------------------
> >>>>>
> >>>>> Message: 1
> >>>>> Date: Mon, 18 Nov 2013 10:20:00 +0100
> >>>>> From: Thomas Lecocq <thomas.lecocq(a)oma.be>
> >>>>> To: msnoise(a)mailman-as.oma.be
> >>>>> Subject: Re: [MSNoise] MSNoise Digest, Vol 2, Issue 4
> >>>>> Message-ID: <5289DBC0.7070502(a)oma.be>
> >>>>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> >>>>>
> >>>>> Hi all,
> >>>>>
> >>>>> It seems to be a OSX-specific problem, I'll report it to the Anaconda
> >>>>> guys to try to debug...
> >>>>>
> >>>>> Sorry about that,
> >>>>>
> >>>>> Thomas
> >>>>>
> >>>>> Le 15/11/2013 20:37, Esteban Chaves a ?crit :
> >>>>>> Hi All,
> >>>>>>
> >>>>>> I got the same problem. I did install my MSNoise and dependencies in
> >>> MAC
> >>>>>> OSx 10.9.
> >>>>>> and when I typed:
> >>>>>>
> >>>>>>>> python s001configurator.py I got this:
> >>>>>> Qt internal error: qt_menu.nib could not be loaded. The .nib file
> >>> should be
> >>>>>> placed in QtGui.framework/Versions/Current/Resources/ or in the
> >>> resources
> >>>>>> directory of your application bundle.
> >>>>>>
> >>>>>> Abort trap: 6
> >>>>>>
> >>>>>>
> >>>>>> I'm using Anaconda, and after reading trough the web my solution was
> >>>>>> using pythonw instead of python, but when the GUI from the
> >> Configurator
> >>>>>> appears, I
> >>>>>> can't
> >>>>>> see all the corresponding spaces. For example I can't change the
> path
> >>> for
> >>>>>> my data, because I can't see the space there. Then after any change
> I
> >>> made
> >>>>>> I got the same message:
> >>>>>>
> >>>>>> Updating Config Table
> >>>>>>
> >>>>>> Updating Station Table
> >>>>>>
> >>>>>> Updating Filter Table
> >>>>>>
> >>>>>> Done !
> >>>>>>
> >>>>>> //anaconda/bin/pythonw: line 2: 6112 Segmentation fault: 11
> >>>>>> //anaconda/python.app/Contents/MacOS/python $@
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Esteban.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Esteban J. Chaves
> >>>>>> PhD Student in Seismology
> >>>>>> Earth and Planetary Sciences
> >>>>>> Earth and Marine Science Building
> >>>>>> office C317B
> >>>>>> University of California, Santa Cruz
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> On Thu, Nov 14, 2013 at 4:00 AM, <msnoise-request(a)mailman-as.oma.be
> >
> >>> wrote:
> >>>>>>> Send MSNoise mailing list submissions to
> >>>>>>> msnoise(a)mailman-as.oma.be
> >>>>>>>
> >>>>>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>>>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>>>>>> or, via email, send a message with subject or body 'help' to
> >>>>>>> msnoise-request(a)mailman-as.oma.be
> >>>>>>>
> >>>>>>> You can reach the person managing the list at
> >>>>>>> msnoise-owner(a)mailman-as.oma.be
> >>>>>>>
> >>>>>>> When replying, please edit your Subject line so it is more specific
> >>>>>>> than "Re: Contents of MSNoise digest..."
> >>>>>>>
> >>>>>>>
> >>>>>>> Today's Topics:
> >>>>>>>
> >>>>>>> 1. Segmentation fault when running s001configurator.py (Wang,
> >>> Xiao)
> >>>>>>>
> >>>>>>>
> >> ----------------------------------------------------------------------
> >>>>>>> Message: 1
> >>>>>>> Date: Wed, 13 Nov 2013 14:57:11 +0000
> >>>>>>> From: "Wang, Xiao" <Xiao.Wang(a)liverpool.ac.uk>
> >>>>>>> To: "msnoise(a)mailman-as.oma.be" <msnoise(a)mailman-as.oma.be>
> >>>>>>> Subject: [MSNoise] Segmentation fault when running
> >> s001configurator.py
> >>>>>>> Message-ID:
> >>>>>>> <
> >>> AFD7E1C355F302448EFE8C6EAE6FB563AEBB7335(a)CHEXMBX1.livad.liv.ac.uk
> >>>>>>> Content-Type: text/plain; charset="iso-8859-1"
> >>>>>>>
> >>>>>>> Not every time, but sometime I encountered "Segmentation fault"
> when
> >>>>>>> running s001configurator.py. The database works fine and can be
> >>> updated
> >>>>>>> properly when the problem happens. I am using msnoise 1.2.
> >>>>>>>
> >>>>>>> Following is the output of the problem:
> >>>>>>>
> >>>>>>> student@seisapp:~/msnoise$ python s001configurator.py
> >>>>>>> Updating Config Table
> >>>>>>> Updating Station Table
> >>>>>>> Updating Filter Table
> >>>>>>> Done !
> >>>>>>> Segmentation fault
> >>>>>>>
> >>>>>>> Regards,
> >>>>>>>
> >>>>>>> Xiao
> >>>>>>>
> >>>>>>>
> >>>>>>> ------------------------------
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> MSNoise mailing list
> >>>>>>> MSNoise(a)mailman-as.oma.be
> >>>>>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>>>>>>
> >>>>>>>
> >>>>>>> End of MSNoise Digest, Vol 2, Issue 4
> >>>>>>> *************************************
> >>>>>>>
> >>>>>> _______________________________________________
> >>>>>> MSNoise mailing list
> >>>>>> MSNoise(a)mailman-as.oma.be
> >>>>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> _______________________________________________
> >>>>> MSNoise mailing list
> >>>>> MSNoise(a)mailman-as.oma.be
> >>>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>>>>
> >>>>>
> >>>>> End of MSNoise Digest, Vol 2, Issue 6
> >>>>> *************************************
> >>>> _______________________________________________
> >>>> MSNoise mailing list
> >>>> MSNoise(a)mailman-as.oma.be
> >>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>> _______________________________________________
> >>> MSNoise mailing list
> >>> MSNoise(a)mailman-as.oma.be
> >>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>>
> >>
Hi All,
I got the same issue. My data is according to BUD format and I got this:
> > python s02new_jobs.py:
> > File ?s02new_jobs.py, line 89, in <module>
> > if day != old_day and day_pairs != []:
> > NameError: name ?day? is not defined
Thomas; I did sent my email to apply to the workshop after AGU. I want to
know if you have some schedule or place where gonna be the workshop.
Besides, maybe you can help me with this problems in the workshop, just in
case I can't fix it before that.
Thanks in advance,
Esteban J. Chaves
PhD Student in Seismology
Earth and Planetary Sciences
Earth and Marine Science Building
office C317B
University of California, Santa Cruz
On Tue, Nov 19, 2013 at 8:37 PM, <msnoise-request(a)mailman-as.oma.be> wrote:
> Send MSNoise mailing list submissions to
> msnoise(a)mailman-as.oma.be
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman-as.oma.be/mailman/listinfo/msnoise
> or, via email, send a message with subject or body 'help' to
> msnoise-request(a)mailman-as.oma.be
>
> You can reach the person managing the list at
> msnoise-owner(a)mailman-as.oma.be
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of MSNoise digest..."
>
>
> Today's Topics:
>
> 1. Re: s02new_jobs (Kasper van Wijk)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 20 Nov 2013 17:36:27 +1300
> From: Kasper van Wijk <k.vanwijk(a)auckland.ac.nz>
> To: Python Package for Monitoring Seismic Velocity Changes using
> Ambient Seismic Noise <msnoise(a)mailman-as.oma.be>
> Subject: Re: [MSNoise] s02new_jobs
> Message-ID:
> <
> CAN-+WRhVirJQ0CCBKS5WFFRhahwN2cXT7RL6HkPD97ZjcJ_bww(a)mail.gmail.com>
> Content-Type: text/plain; charset="windows-1252"
>
> Thomas, we reinstalled with your latest versions, and now have the same
> problem as Esteban, I am afraid:
>
> [kasper@kvan637-277769 MSNoise-master]$ python s02new_jobs.py
> 2013-11-20 17:30:32,540 [INFO] *** Starting: New Jobs ***
> Traceback (most recent call last):
> File "s02new_jobs.py", line 89, in <module>
> if day != old_day and day_pairs != []:
> NameError: name 'day' is not defined
>
> My data structure is BUD (and appears correct in the configurator (snapshot
> attached), and there is more than one day's worth of data in the structure
> to correlate. File names are like this:
>
> ABAZ.NZ..EHE.2013.322 ABAZ.NZ..EHN.2013.322 ABAZ.NZ..EHZ.2013.322
> ABAZ.NZ..EHE.2013.323 ABAZ.NZ..EHN.2013.323 ABAZ.NZ..EHZ.2013.323
>
> I did notice among a large amount of output to screen that there was an
> error in
>
> > python s01scan_archive.py init
>
> ......
> 2013-11-20 17:27:11,154 [DEBUG] Already Exists: "ABAZ.NZ..EHZ.2013.322"
> (read:0.19 (0.22) seconds | save:0.0275 seconds)
> Traceback (most recent call last):
> File "s01scan_archive.py", line 203, in <module>
> t.start()
> File "/usr/lib64/python2.7/threading.py", line 746, in start
> _start_new_thread(self.__bootstrap, ())
> thread.error: can't start new thread
> 2013-11-20 17:27:11,324 [DEBUG] Already Exists: "ABAZ.NZ..EHZ.2013.323"
> (read:0.16 (0.16) seconds | save:0.0038 seconds)
> .....
>
> but it did finish the scanning.
>
> I am running this under linux, FC19.
>
> Cheers,
> Kasper
>
>
> On 19 November 2013 19:09, Thomas Lecocq <thomas.lecocq(a)oma.be> wrote:
>
> > Hi Esteban,
> >
> > Le 19/11/2013 00:59, Esteban Chaves Sibaja a ?crit :
> > > Hi,
> > >
> > > I?m trying to run my data as example: just 2 stations and ech record
> has
> > 24 hours (SAC format):
> > > /DATA/YZ/MIRM/MIRM.YZ.HHZ.2013.199
> > > /DATA/YZ/GRAS/GRAS.YZ.CR.HHZ.2013.199
> > >
> > >
> > > But I got the next error after type >> python s02new_jobs.py:
> > >
> > > File ?s02new_jobs.py, line 89, in <module>
> > > if day != old_day and day_pairs != []:
> > > NameError: name ?day? is not defined
> > >
> > > So. What should be the correct format of the input data? SAC or mseed?
> > > and how can I solve this time problem?
> >
> > Currently, only the archive formats defined as :
> >
> > data_structure['SDS'] =
> > "YEAR/NET/STA/CHAN.TYPE/NET.STA.LOC.CHAN.TYPE.YEAR.DAY"
> > data_structure['BUD'] = "NET/STA/STA.NET.LOC.CHAN.YEAR.DAY"
> > data_structure['IDDS'] =
> > "YEAR/NET/STA/CHAN.TYPE/DAY/NET.STA.LOC.CHAN.TYPE.YEAR.DAY.HOUR"
> > data_structure['PDF'] =
> > "YEAR/STA/CHAN.TYPE/NET.STA.LOC.CHAN.TYPE.YEAR.DAY"
> >
> >
> > are known by MSNoise. You have to define your own format in the
> > data_structures.py file
> >
> > data_structure['NAME'] = "NET/STA/STA.NET.LOC.CHAN.YEAR.DAY"
> >
> > Once done, the "s002populate_station_table.py" script should find your
> > stations/network and the rest of the workflow should work fine.
> >
> > Let me know how it goes,
> >
> > Thomas
> >
> > >
> > > Sorry about the question, but I?ll appreciate the help to solve it and
> > continue using my data.
> > >
> > > Esteban
> > >
> > >
> > > On Nov 18, 2013, at 4:00 AM, msnoise-request(a)mailman-as.oma.be wrote:
> > >
> > >> Send MSNoise mailing list submissions to
> > >> msnoise(a)mailman-as.oma.be
> > >>
> > >> To subscribe or unsubscribe via the World Wide Web, visit
> > >> http://mailman-as.oma.be/mailman/listinfo/msnoise
> > >> or, via email, send a message with subject or body 'help' to
> > >> msnoise-request(a)mailman-as.oma.be
> > >>
> > >> You can reach the person managing the list at
> > >> msnoise-owner(a)mailman-as.oma.be
> > >>
> > >> When replying, please edit your Subject line so it is more specific
> > >> than "Re: Contents of MSNoise digest..."
> > >>
> > >>
> > >> Today's Topics:
> > >>
> > >> 1. Re: MSNoise Digest, Vol 2, Issue 4 (Thomas Lecocq)
> > >>
> > >>
> > >> ----------------------------------------------------------------------
> > >>
> > >> Message: 1
> > >> Date: Mon, 18 Nov 2013 10:20:00 +0100
> > >> From: Thomas Lecocq <thomas.lecocq(a)oma.be>
> > >> To: msnoise(a)mailman-as.oma.be
> > >> Subject: Re: [MSNoise] MSNoise Digest, Vol 2, Issue 4
> > >> Message-ID: <5289DBC0.7070502(a)oma.be>
> > >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> > >>
> > >> Hi all,
> > >>
> > >> It seems to be a OSX-specific problem, I'll report it to the Anaconda
> > >> guys to try to debug...
> > >>
> > >> Sorry about that,
> > >>
> > >> Thomas
> > >>
> > >> Le 15/11/2013 20:37, Esteban Chaves a ?crit :
> > >>> Hi All,
> > >>>
> > >>> I got the same problem. I did install my MSNoise and dependencies in
> > MAC
> > >>> OSx 10.9.
> > >>> and when I typed:
> > >>>
> > >>>>> python s001configurator.py I got this:
> > >>> Qt internal error: qt_menu.nib could not be loaded. The .nib file
> > should be
> > >>> placed in QtGui.framework/Versions/Current/Resources/ or in the
> > resources
> > >>> directory of your application bundle.
> > >>>
> > >>> Abort trap: 6
> > >>>
> > >>>
> > >>> I'm using Anaconda, and after reading trough the web my solution was
> > >>> using pythonw instead of python, but when the GUI from the
> Configurator
> > >>> appears, I
> > >>> can't
> > >>> see all the corresponding spaces. For example I can't change the path
> > for
> > >>> my data, because I can't see the space there. Then after any change I
> > made
> > >>> I got the same message:
> > >>>
> > >>> Updating Config Table
> > >>>
> > >>> Updating Station Table
> > >>>
> > >>> Updating Filter Table
> > >>>
> > >>> Done !
> > >>>
> > >>> //anaconda/bin/pythonw: line 2: 6112 Segmentation fault: 11
> > >>> //anaconda/python.app/Contents/MacOS/python $@
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> Esteban.
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> Esteban J. Chaves
> > >>> PhD Student in Seismology
> > >>> Earth and Planetary Sciences
> > >>> Earth and Marine Science Building
> > >>> office C317B
> > >>> University of California, Santa Cruz
> > >>>
> > >>>
> > >>>
> > >>> On Thu, Nov 14, 2013 at 4:00 AM, <msnoise-request(a)mailman-as.oma.be>
> > wrote:
> > >>>
> > >>>> Send MSNoise mailing list submissions to
> > >>>> msnoise(a)mailman-as.oma.be
> > >>>>
> > >>>> To subscribe or unsubscribe via the World Wide Web, visit
> > >>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> > >>>> or, via email, send a message with subject or body 'help' to
> > >>>> msnoise-request(a)mailman-as.oma.be
> > >>>>
> > >>>> You can reach the person managing the list at
> > >>>> msnoise-owner(a)mailman-as.oma.be
> > >>>>
> > >>>> When replying, please edit your Subject line so it is more specific
> > >>>> than "Re: Contents of MSNoise digest..."
> > >>>>
> > >>>>
> > >>>> Today's Topics:
> > >>>>
> > >>>> 1. Segmentation fault when running s001configurator.py (Wang,
> > Xiao)
> > >>>>
> > >>>>
> > >>>>
> ----------------------------------------------------------------------
> > >>>>
> > >>>> Message: 1
> > >>>> Date: Wed, 13 Nov 2013 14:57:11 +0000
> > >>>> From: "Wang, Xiao" <Xiao.Wang(a)liverpool.ac.uk>
> > >>>> To: "msnoise(a)mailman-as.oma.be" <msnoise(a)mailman-as.oma.be>
> > >>>> Subject: [MSNoise] Segmentation fault when running
> s001configurator.py
> > >>>> Message-ID:
> > >>>> <
> > AFD7E1C355F302448EFE8C6EAE6FB563AEBB7335(a)CHEXMBX1.livad.liv.ac.uk
> > >>>> Content-Type: text/plain; charset="iso-8859-1"
> > >>>>
> > >>>> Not every time, but sometime I encountered "Segmentation fault" when
> > >>>> running s001configurator.py. The database works fine and can be
> > updated
> > >>>> properly when the problem happens. I am using msnoise 1.2.
> > >>>>
> > >>>> Following is the output of the problem:
> > >>>>
> > >>>> student@seisapp:~/msnoise$ python s001configurator.py
> > >>>> Updating Config Table
> > >>>> Updating Station Table
> > >>>> Updating Filter Table
> > >>>> Done !
> > >>>> Segmentation fault
> > >>>>
> > >>>> Regards,
> > >>>>
> > >>>> Xiao
> > >>>>
> > >>>>
> > >>>> ------------------------------
> > >>>>
> > >>>> _______________________________________________
> > >>>> MSNoise mailing list
> > >>>> MSNoise(a)mailman-as.oma.be
> > >>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> > >>>>
> > >>>>
> > >>>> End of MSNoise Digest, Vol 2, Issue 4
> > >>>> *************************************
> > >>>>
> > >>> _______________________________________________
> > >>> MSNoise mailing list
> > >>> MSNoise(a)mailman-as.oma.be
> > >>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> > >>
> > >>
> > >> ------------------------------
> > >>
> > >> _______________________________________________
> > >> MSNoise mailing list
> > >> MSNoise(a)mailman-as.oma.be
> > >> http://mailman-as.oma.be/mailman/listinfo/msnoise
> > >>
> > >>
> > >> End of MSNoise Digest, Vol 2, Issue 6
> > >> *************************************
> > > _______________________________________________
> > > MSNoise mailing list
> > > MSNoise(a)mailman-as.oma.be
> > > http://mailman-as.oma.be/mailman/listinfo/msnoise
> >
> > _______________________________________________
> > MSNoise mailing list
> > MSNoise(a)mailman-as.oma.be
> > http://mailman-as.oma.be/mailman/listinfo/msnoise
> >
>
Thomas, we reinstalled with your latest versions, and now have the same
problem as Esteban, I am afraid:
[kasper@kvan637-277769 MSNoise-master]$ python s02new_jobs.py
2013-11-20 17:30:32,540 [INFO] *** Starting: New Jobs ***
Traceback (most recent call last):
File "s02new_jobs.py", line 89, in <module>
if day != old_day and day_pairs != []:
NameError: name 'day' is not defined
My data structure is BUD (and appears correct in the configurator (snapshot
attached), and there is more than one day's worth of data in the structure
to correlate. File names are like this:
ABAZ.NZ..EHE.2013.322 ABAZ.NZ..EHN.2013.322 ABAZ.NZ..EHZ.2013.322
ABAZ.NZ..EHE.2013.323 ABAZ.NZ..EHN.2013.323 ABAZ.NZ..EHZ.2013.323
I did notice among a large amount of output to screen that there was an
error in
> python s01scan_archive.py init
......
2013-11-20 17:27:11,154 [DEBUG] Already Exists: "ABAZ.NZ..EHZ.2013.322"
(read:0.19 (0.22) seconds | save:0.0275 seconds)
Traceback (most recent call last):
File "s01scan_archive.py", line 203, in <module>
t.start()
File "/usr/lib64/python2.7/threading.py", line 746, in start
_start_new_thread(self.__bootstrap, ())
thread.error: can't start new thread
2013-11-20 17:27:11,324 [DEBUG] Already Exists: "ABAZ.NZ..EHZ.2013.323"
(read:0.16 (0.16) seconds | save:0.0038 seconds)
.....
but it did finish the scanning.
I am running this under linux, FC19.
Cheers,
Kasper
On 19 November 2013 19:09, Thomas Lecocq <thomas.lecocq(a)oma.be> wrote:
> Hi Esteban,
>
> Le 19/11/2013 00:59, Esteban Chaves Sibaja a écrit :
> > Hi,
> >
> > I’m trying to run my data as example: just 2 stations and ech record has
> 24 hours (SAC format):
> > /DATA/YZ/MIRM/MIRM.YZ.HHZ.2013.199
> > /DATA/YZ/GRAS/GRAS.YZ.CR.HHZ.2013.199
> >
> >
> > But I got the next error after type >> python s02new_jobs.py:
> >
> > File “s02new_jobs.py, line 89, in <module>
> > if day != old_day and day_pairs != []:
> > NameError: name ‘day’ is not defined
> >
> > So. What should be the correct format of the input data? SAC or mseed?
> > and how can I solve this time problem?
>
> Currently, only the archive formats defined as :
>
> data_structure['SDS'] =
> "YEAR/NET/STA/CHAN.TYPE/NET.STA.LOC.CHAN.TYPE.YEAR.DAY"
> data_structure['BUD'] = "NET/STA/STA.NET.LOC.CHAN.YEAR.DAY"
> data_structure['IDDS'] =
> "YEAR/NET/STA/CHAN.TYPE/DAY/NET.STA.LOC.CHAN.TYPE.YEAR.DAY.HOUR"
> data_structure['PDF'] =
> "YEAR/STA/CHAN.TYPE/NET.STA.LOC.CHAN.TYPE.YEAR.DAY"
>
>
> are known by MSNoise. You have to define your own format in the
> data_structures.py file
>
> data_structure['NAME'] = "NET/STA/STA.NET.LOC.CHAN.YEAR.DAY"
>
> Once done, the "s002populate_station_table.py" script should find your
> stations/network and the rest of the workflow should work fine.
>
> Let me know how it goes,
>
> Thomas
>
> >
> > Sorry about the question, but I’ll appreciate the help to solve it and
> continue using my data.
> >
> > Esteban
> >
> >
> > On Nov 18, 2013, at 4:00 AM, msnoise-request(a)mailman-as.oma.be wrote:
> >
> >> Send MSNoise mailing list submissions to
> >> msnoise(a)mailman-as.oma.be
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >> or, via email, send a message with subject or body 'help' to
> >> msnoise-request(a)mailman-as.oma.be
> >>
> >> You can reach the person managing the list at
> >> msnoise-owner(a)mailman-as.oma.be
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of MSNoise digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >> 1. Re: MSNoise Digest, Vol 2, Issue 4 (Thomas Lecocq)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Mon, 18 Nov 2013 10:20:00 +0100
> >> From: Thomas Lecocq <thomas.lecocq(a)oma.be>
> >> To: msnoise(a)mailman-as.oma.be
> >> Subject: Re: [MSNoise] MSNoise Digest, Vol 2, Issue 4
> >> Message-ID: <5289DBC0.7070502(a)oma.be>
> >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> >>
> >> Hi all,
> >>
> >> It seems to be a OSX-specific problem, I'll report it to the Anaconda
> >> guys to try to debug...
> >>
> >> Sorry about that,
> >>
> >> Thomas
> >>
> >> Le 15/11/2013 20:37, Esteban Chaves a ?crit :
> >>> Hi All,
> >>>
> >>> I got the same problem. I did install my MSNoise and dependencies in
> MAC
> >>> OSx 10.9.
> >>> and when I typed:
> >>>
> >>>>> python s001configurator.py I got this:
> >>> Qt internal error: qt_menu.nib could not be loaded. The .nib file
> should be
> >>> placed in QtGui.framework/Versions/Current/Resources/ or in the
> resources
> >>> directory of your application bundle.
> >>>
> >>> Abort trap: 6
> >>>
> >>>
> >>> I'm using Anaconda, and after reading trough the web my solution was
> >>> using pythonw instead of python, but when the GUI from the Configurator
> >>> appears, I
> >>> can't
> >>> see all the corresponding spaces. For example I can't change the path
> for
> >>> my data, because I can't see the space there. Then after any change I
> made
> >>> I got the same message:
> >>>
> >>> Updating Config Table
> >>>
> >>> Updating Station Table
> >>>
> >>> Updating Filter Table
> >>>
> >>> Done !
> >>>
> >>> //anaconda/bin/pythonw: line 2: 6112 Segmentation fault: 11
> >>> //anaconda/python.app/Contents/MacOS/python $@
> >>>
> >>>
> >>>
> >>>
> >>> Esteban.
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Esteban J. Chaves
> >>> PhD Student in Seismology
> >>> Earth and Planetary Sciences
> >>> Earth and Marine Science Building
> >>> office C317B
> >>> University of California, Santa Cruz
> >>>
> >>>
> >>>
> >>> On Thu, Nov 14, 2013 at 4:00 AM, <msnoise-request(a)mailman-as.oma.be>
> wrote:
> >>>
> >>>> Send MSNoise mailing list submissions to
> >>>> msnoise(a)mailman-as.oma.be
> >>>>
> >>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>>> or, via email, send a message with subject or body 'help' to
> >>>> msnoise-request(a)mailman-as.oma.be
> >>>>
> >>>> You can reach the person managing the list at
> >>>> msnoise-owner(a)mailman-as.oma.be
> >>>>
> >>>> When replying, please edit your Subject line so it is more specific
> >>>> than "Re: Contents of MSNoise digest..."
> >>>>
> >>>>
> >>>> Today's Topics:
> >>>>
> >>>> 1. Segmentation fault when running s001configurator.py (Wang,
> Xiao)
> >>>>
> >>>>
> >>>> ----------------------------------------------------------------------
> >>>>
> >>>> Message: 1
> >>>> Date: Wed, 13 Nov 2013 14:57:11 +0000
> >>>> From: "Wang, Xiao" <Xiao.Wang(a)liverpool.ac.uk>
> >>>> To: "msnoise(a)mailman-as.oma.be" <msnoise(a)mailman-as.oma.be>
> >>>> Subject: [MSNoise] Segmentation fault when running s001configurator.py
> >>>> Message-ID:
> >>>> <
> AFD7E1C355F302448EFE8C6EAE6FB563AEBB7335(a)CHEXMBX1.livad.liv.ac.uk
> >>>> Content-Type: text/plain; charset="iso-8859-1"
> >>>>
> >>>> Not every time, but sometime I encountered "Segmentation fault" when
> >>>> running s001configurator.py. The database works fine and can be
> updated
> >>>> properly when the problem happens. I am using msnoise 1.2.
> >>>>
> >>>> Following is the output of the problem:
> >>>>
> >>>> student@seisapp:~/msnoise$ python s001configurator.py
> >>>> Updating Config Table
> >>>> Updating Station Table
> >>>> Updating Filter Table
> >>>> Done !
> >>>> Segmentation fault
> >>>>
> >>>> Regards,
> >>>>
> >>>> Xiao
> >>>>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> _______________________________________________
> >>>> MSNoise mailing list
> >>>> MSNoise(a)mailman-as.oma.be
> >>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>>>
> >>>>
> >>>> End of MSNoise Digest, Vol 2, Issue 4
> >>>> *************************************
> >>>>
> >>> _______________________________________________
> >>> MSNoise mailing list
> >>> MSNoise(a)mailman-as.oma.be
> >>> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>
> >>
> >> ------------------------------
> >>
> >> _______________________________________________
> >> MSNoise mailing list
> >> MSNoise(a)mailman-as.oma.be
> >> http://mailman-as.oma.be/mailman/listinfo/msnoise
> >>
> >>
> >> End of MSNoise Digest, Vol 2, Issue 6
> >> *************************************
> > _______________________________________________
> > MSNoise mailing list
> > MSNoise(a)mailman-as.oma.be
> > http://mailman-as.oma.be/mailman/listinfo/msnoise
>
> _______________________________________________
> MSNoise mailing list
> MSNoise(a)mailman-as.oma.be
> http://mailman-as.oma.be/mailman/listinfo/msnoise
>
Hi,
I’m trying to run my data as example: just 2 stations and ech record has 24 hours (SAC format):
/DATA/YZ/MIRM/MIRM.YZ.HHZ.2013.199
/DATA/YZ/GRAS/GRAS.YZ.CR.HHZ.2013.199
But I got the next error after type >> python s02new_jobs.py:
File “s02new_jobs.py, line 89, in <module>
if day != old_day and day_pairs != []:
NameError: name ‘day’ is not defined
So. What should be the correct format of the input data? SAC or mseed?
and how can I solve this time problem?
Sorry about the question, but I’ll appreciate the help to solve it and continue using my data.
Esteban
On Nov 18, 2013, at 4:00 AM, msnoise-request(a)mailman-as.oma.be wrote:
> Send MSNoise mailing list submissions to
> msnoise(a)mailman-as.oma.be
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman-as.oma.be/mailman/listinfo/msnoise
> or, via email, send a message with subject or body 'help' to
> msnoise-request(a)mailman-as.oma.be
>
> You can reach the person managing the list at
> msnoise-owner(a)mailman-as.oma.be
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of MSNoise digest..."
>
>
> Today's Topics:
>
> 1. Re: MSNoise Digest, Vol 2, Issue 4 (Thomas Lecocq)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 18 Nov 2013 10:20:00 +0100
> From: Thomas Lecocq <thomas.lecocq(a)oma.be>
> To: msnoise(a)mailman-as.oma.be
> Subject: Re: [MSNoise] MSNoise Digest, Vol 2, Issue 4
> Message-ID: <5289DBC0.7070502(a)oma.be>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi all,
>
> It seems to be a OSX-specific problem, I'll report it to the Anaconda
> guys to try to debug...
>
> Sorry about that,
>
> Thomas
>
> Le 15/11/2013 20:37, Esteban Chaves a ?crit :
>> Hi All,
>>
>> I got the same problem. I did install my MSNoise and dependencies in MAC
>> OSx 10.9.
>> and when I typed:
>>
>>>> python s001configurator.py I got this:
>> Qt internal error: qt_menu.nib could not be loaded. The .nib file should be
>> placed in QtGui.framework/Versions/Current/Resources/ or in the resources
>> directory of your application bundle.
>>
>> Abort trap: 6
>>
>>
>> I'm using Anaconda, and after reading trough the web my solution was
>> using pythonw instead of python, but when the GUI from the Configurator
>> appears, I
>> can't
>> see all the corresponding spaces. For example I can't change the path for
>> my data, because I can't see the space there. Then after any change I made
>> I got the same message:
>>
>> Updating Config Table
>>
>> Updating Station Table
>>
>> Updating Filter Table
>>
>> Done !
>>
>> //anaconda/bin/pythonw: line 2: 6112 Segmentation fault: 11
>> //anaconda/python.app/Contents/MacOS/python $@
>>
>>
>>
>>
>> Esteban.
>>
>>
>>
>>
>>
>>
>> Esteban J. Chaves
>> PhD Student in Seismology
>> Earth and Planetary Sciences
>> Earth and Marine Science Building
>> office C317B
>> University of California, Santa Cruz
>>
>>
>>
>> On Thu, Nov 14, 2013 at 4:00 AM, <msnoise-request(a)mailman-as.oma.be> wrote:
>>
>>> Send MSNoise mailing list submissions to
>>> msnoise(a)mailman-as.oma.be
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
>>> or, via email, send a message with subject or body 'help' to
>>> msnoise-request(a)mailman-as.oma.be
>>>
>>> You can reach the person managing the list at
>>> msnoise-owner(a)mailman-as.oma.be
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of MSNoise digest..."
>>>
>>>
>>> Today's Topics:
>>>
>>> 1. Segmentation fault when running s001configurator.py (Wang, Xiao)
>>>
>>>
>>> ----------------------------------------------------------------------
>>>
>>> Message: 1
>>> Date: Wed, 13 Nov 2013 14:57:11 +0000
>>> From: "Wang, Xiao" <Xiao.Wang(a)liverpool.ac.uk>
>>> To: "msnoise(a)mailman-as.oma.be" <msnoise(a)mailman-as.oma.be>
>>> Subject: [MSNoise] Segmentation fault when running s001configurator.py
>>> Message-ID:
>>> <AFD7E1C355F302448EFE8C6EAE6FB563AEBB7335(a)CHEXMBX1.livad.liv.ac.uk
>>> Content-Type: text/plain; charset="iso-8859-1"
>>>
>>> Not every time, but sometime I encountered "Segmentation fault" when
>>> running s001configurator.py. The database works fine and can be updated
>>> properly when the problem happens. I am using msnoise 1.2.
>>>
>>> Following is the output of the problem:
>>>
>>> student@seisapp:~/msnoise$ python s001configurator.py
>>> Updating Config Table
>>> Updating Station Table
>>> Updating Filter Table
>>> Done !
>>> Segmentation fault
>>>
>>> Regards,
>>>
>>> Xiao
>>>
>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> MSNoise mailing list
>>> MSNoise(a)mailman-as.oma.be
>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
>>>
>>>
>>> End of MSNoise Digest, Vol 2, Issue 4
>>> *************************************
>>>
>> _______________________________________________
>> MSNoise mailing list
>> MSNoise(a)mailman-as.oma.be
>> http://mailman-as.oma.be/mailman/listinfo/msnoise
>
>
>
> ------------------------------
>
> _______________________________________________
> MSNoise mailing list
> MSNoise(a)mailman-as.oma.be
> http://mailman-as.oma.be/mailman/listinfo/msnoise
>
>
> End of MSNoise Digest, Vol 2, Issue 6
> *************************************
Hi Thomas,
After add:
import sys
sys.exit()
in s001configurator.py I got the same result:
Qt internal error: qt_menu.nib could not be loaded. The .nib file should be placed in QtGui.framework/Versions/Current/Resources/ or in the resources directory of your application bundle.
Abort trap: 6
Thanks in advance.
Esteban
On Nov 18, 2013, at 4:00 AM, msnoise-request(a)mailman-as.oma.be wrote:
> Send MSNoise mailing list submissions to
> msnoise(a)mailman-as.oma.be
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman-as.oma.be/mailman/listinfo/msnoise
> or, via email, send a message with subject or body 'help' to
> msnoise-request(a)mailman-as.oma.be
>
> You can reach the person managing the list at
> msnoise-owner(a)mailman-as.oma.be
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of MSNoise digest..."
>
>
> Today's Topics:
>
> 1. Re: MSNoise Digest, Vol 2, Issue 4 (Thomas Lecocq)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 18 Nov 2013 10:20:00 +0100
> From: Thomas Lecocq <thomas.lecocq(a)oma.be>
> To: msnoise(a)mailman-as.oma.be
> Subject: Re: [MSNoise] MSNoise Digest, Vol 2, Issue 4
> Message-ID: <5289DBC0.7070502(a)oma.be>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi all,
>
> It seems to be a OSX-specific problem, I'll report it to the Anaconda
> guys to try to debug...
>
> Sorry about that,
>
> Thomas
>
> Le 15/11/2013 20:37, Esteban Chaves a ?crit :
>> Hi All,
>>
>> I got the same problem. I did install my MSNoise and dependencies in MAC
>> OSx 10.9.
>> and when I typed:
>>
>>>> python s001configurator.py I got this:
>> Qt internal error: qt_menu.nib could not be loaded. The .nib file should be
>> placed in QtGui.framework/Versions/Current/Resources/ or in the resources
>> directory of your application bundle.
>>
>> Abort trap: 6
>>
>>
>> I'm using Anaconda, and after reading trough the web my solution was
>> using pythonw instead of python, but when the GUI from the Configurator
>> appears, I
>> can't
>> see all the corresponding spaces. For example I can't change the path for
>> my data, because I can't see the space there. Then after any change I made
>> I got the same message:
>>
>> Updating Config Table
>>
>> Updating Station Table
>>
>> Updating Filter Table
>>
>> Done !
>>
>> //anaconda/bin/pythonw: line 2: 6112 Segmentation fault: 11
>> //anaconda/python.app/Contents/MacOS/python $@
>>
>>
>>
>>
>> Esteban.
>>
>>
>>
>>
>>
>>
>> Esteban J. Chaves
>> PhD Student in Seismology
>> Earth and Planetary Sciences
>> Earth and Marine Science Building
>> office C317B
>> University of California, Santa Cruz
>>
>>
>>
>> On Thu, Nov 14, 2013 at 4:00 AM, <msnoise-request(a)mailman-as.oma.be> wrote:
>>
>>> Send MSNoise mailing list submissions to
>>> msnoise(a)mailman-as.oma.be
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
>>> or, via email, send a message with subject or body 'help' to
>>> msnoise-request(a)mailman-as.oma.be
>>>
>>> You can reach the person managing the list at
>>> msnoise-owner(a)mailman-as.oma.be
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of MSNoise digest..."
>>>
>>>
>>> Today's Topics:
>>>
>>> 1. Segmentation fault when running s001configurator.py (Wang, Xiao)
>>>
>>>
>>> ----------------------------------------------------------------------
>>>
>>> Message: 1
>>> Date: Wed, 13 Nov 2013 14:57:11 +0000
>>> From: "Wang, Xiao" <Xiao.Wang(a)liverpool.ac.uk>
>>> To: "msnoise(a)mailman-as.oma.be" <msnoise(a)mailman-as.oma.be>
>>> Subject: [MSNoise] Segmentation fault when running s001configurator.py
>>> Message-ID:
>>> <AFD7E1C355F302448EFE8C6EAE6FB563AEBB7335(a)CHEXMBX1.livad.liv.ac.uk
>>> Content-Type: text/plain; charset="iso-8859-1"
>>>
>>> Not every time, but sometime I encountered "Segmentation fault" when
>>> running s001configurator.py. The database works fine and can be updated
>>> properly when the problem happens. I am using msnoise 1.2.
>>>
>>> Following is the output of the problem:
>>>
>>> student@seisapp:~/msnoise$ python s001configurator.py
>>> Updating Config Table
>>> Updating Station Table
>>> Updating Filter Table
>>> Done !
>>> Segmentation fault
>>>
>>> Regards,
>>>
>>> Xiao
>>>
>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> MSNoise mailing list
>>> MSNoise(a)mailman-as.oma.be
>>> http://mailman-as.oma.be/mailman/listinfo/msnoise
>>>
>>>
>>> End of MSNoise Digest, Vol 2, Issue 4
>>> *************************************
>>>
>> _______________________________________________
>> MSNoise mailing list
>> MSNoise(a)mailman-as.oma.be
>> http://mailman-as.oma.be/mailman/listinfo/msnoise
>
>
>
> ------------------------------
>
> _______________________________________________
> MSNoise mailing list
> MSNoise(a)mailman-as.oma.be
> http://mailman-as.oma.be/mailman/listinfo/msnoise
>
>
> End of MSNoise Digest, Vol 2, Issue 6
> *************************************
Hi All,
I got the same problem. I did install my MSNoise and dependencies in MAC
OSx 10.9.
and when I typed:
>> python s001configurator.py I got this:
Qt internal error: qt_menu.nib could not be loaded. The .nib file should be
placed in QtGui.framework/Versions/Current/Resources/ or in the resources
directory of your application bundle.
Abort trap: 6
I'm using Anaconda, and after reading trough the web my solution was
using pythonw instead of python, but when the GUI from the Configurator
appears, I
can't
see all the corresponding spaces. For example I can't change the path for
my data, because I can't see the space there. Then after any change I made
I got the same message:
Updating Config Table
Updating Station Table
Updating Filter Table
Done !
//anaconda/bin/pythonw: line 2: 6112 Segmentation fault: 11
//anaconda/python.app/Contents/MacOS/python $@
Esteban.
Esteban J. Chaves
PhD Student in Seismology
Earth and Planetary Sciences
Earth and Marine Science Building
office C317B
University of California, Santa Cruz
On Thu, Nov 14, 2013 at 4:00 AM, <msnoise-request(a)mailman-as.oma.be> wrote:
> Send MSNoise mailing list submissions to
> msnoise(a)mailman-as.oma.be
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman-as.oma.be/mailman/listinfo/msnoise
> or, via email, send a message with subject or body 'help' to
> msnoise-request(a)mailman-as.oma.be
>
> You can reach the person managing the list at
> msnoise-owner(a)mailman-as.oma.be
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of MSNoise digest..."
>
>
> Today's Topics:
>
> 1. Segmentation fault when running s001configurator.py (Wang, Xiao)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 13 Nov 2013 14:57:11 +0000
> From: "Wang, Xiao" <Xiao.Wang(a)liverpool.ac.uk>
> To: "msnoise(a)mailman-as.oma.be" <msnoise(a)mailman-as.oma.be>
> Subject: [MSNoise] Segmentation fault when running s001configurator.py
> Message-ID:
> <AFD7E1C355F302448EFE8C6EAE6FB563AEBB7335(a)CHEXMBX1.livad.liv.ac.uk
> >
> Content-Type: text/plain; charset="iso-8859-1"
>
> Not every time, but sometime I encountered "Segmentation fault" when
> running s001configurator.py. The database works fine and can be updated
> properly when the problem happens. I am using msnoise 1.2.
>
> Following is the output of the problem:
>
> student@seisapp:~/msnoise$ python s001configurator.py
> Updating Config Table
> Updating Station Table
> Updating Filter Table
> Done !
> Segmentation fault
>
> Regards,
>
> Xiao
>
>
> ------------------------------
>
> _______________________________________________
> MSNoise mailing list
> MSNoise(a)mailman-as.oma.be
> http://mailman-as.oma.be/mailman/listinfo/msnoise
>
>
> End of MSNoise Digest, Vol 2, Issue 4
> *************************************
>
Not every time, but sometime I encountered "Segmentation fault" when running s001configurator.py. The database works fine and can be updated properly when the problem happens. I am using msnoise 1.2.
Following is the output of the problem:
student@seisapp:~/msnoise$ python s001configurator.py
Updating Config Table
Updating Station Table
Updating Filter Table
Done !
Segmentation fault
Regards,
Xiao
Dear All,
I'm trying to install MSNoise in my Mac Osx 10.9 (Maverick).
I did install anaconda very well and it is working right know.
I'm follow the installation steps, so when I type:
easy_install scikits.samplerate
I got this:
Searching for scikits.samplerate
Reading http://pypi.python.org/simple/scikits.samplerate/
Best match: scikits.samplerate 0.3.3
Downloading
https://pypi.python.org/packages/source/s/scikits.samplerate/scikits.sample…
Processing scikits.samplerate-0.3.3.tar.gz
Writing
/var/folders/bc/q4sxsbn100l4qq0smjt678nw0000gq/T/easy_install-oe8bt4/scikits.samplerate-0.3.3/setup.cfg
Running scikits.samplerate-0.3.3/setup.py -q bdist_egg --dist-dir
/var/folders/bc/q4sxsbn100l4qq0smjt678nw0000gq/T/easy_install-oe8bt4/scikits.samplerate-0.3.3/egg-dist-tmp-Er7FgF
error: SRC (http://www.mega-nerd.com/SRC/) library not found. Directories
to search
for the libraries can be specified in the site.cfg file, in section
[samplerate].
Then I proceeded according to the help, but I have troubles
compiling libsamplerate and libsndfile which are necessary to install
scikits.samplerate-0.3.3. For example, I got this when I try to compile
libsndfile:
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/CoreServices.framework/Frameworks/CarbonCore.framework/Headers/FixMath.h:199:8:
error:
unknown type name 'Fixed'
extern Fixed
^
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/CoreServices.framework/Frameworks/CarbonCore.framework/Headers/FixMath.h:200:10:
error:
unknown type name 'Fract'
Frac2Fix(Fract x) __OSX_AVAI...
^
fatal error: too many errors emitted, stopping now [-ferror-limit=]
20 errors generated.
make[1]: *** [sndfile-play.o] Error 1
make: *** [all-recursive] Error 1
So I can't continue. Any help will be appreciate.
Thanks in advance,
--
Esteban J. Chaves
Seismology PhD student
Earth and Planetary Sciences
University of California, Santa Cruz
Office: EMS D231
In s06compute_dtt.py, when updated_days_for_dates is called with pair as "%", it doesn't work in database_tools.py. There is no query result back when calling days = session.query(Job).filter(Job.pair == pair).filter(Job.day >= date1).filter(Job.day <= date2).filter(Job.type == type).filter(Job.lastmod >= lastmod).group_by(Job.day).order_by(Job.day).all().
It probably work under windows, but it doesn't work in Linux.
Xiao
